Best current price£95.92from eBay
Shopping.co.uk recommended and popular offers
eBay£95.92Visit shop Jcp Fixings A4-316 St/St Throughbolts M12 x 95 - Box of 25
Visit shop
Debenhams£97.08Visit shop Jcp Construction Products Unisex Silver Jcp Fixings A4-316 St/St Throughbolts M12 X 95 - Box Of 25 In 25In
Visit shop4 offers from £95.92 - £100.72
View price history by clicking the chart icon.
JCP Fixings Throughbolts are heavy-duty mechanical anchors designed for construction professionals and contractors who require secure fastening in concrete or solid masonry. These M12 x 95 bolts provide exceptional load-bearing strength, making them ideal for structural steel connections and heavy equipment mounting. While they offer superior durability, they require precision drilling and are not suitable for use in hollow brick or soft substrates.
| Colour | Silver |
|---|---|
| Model Part Number | 5014196663128 |
| Brand | JCP Fixings |
These throughbolts are specifically engineered for solid concrete. They are not recommended for hollow bricks or aerated blocks.
The total length of the bolt is 95mm.
No, these are mechanical expansion anchors intended for permanent installation.
Yes, always consult the structural engineering specifications for your project to determine the correct torque value for M12 fixings.
The finish offers basic protection, but for highly corrosive environments like coastal areas, stainless steel alternatives might be preferred.
The hole may be oversized or the substrate is too soft. Check drill bit diameter and move to a more solid section of the concrete.
Ensure the hole is cleaned of drilling dust and verify the drill bit diameter has not been worn down.
Check the threads for debris or damage; if the threads are stripped, the bolt must be replaced.
To ensure proper installation, always use a masonry drill bit with a diameter matching the bolt specifications. Clear all debris and dust from the drilled hole before insertion to maximize friction-based grip. Use a hammer to drive the bolt until the washer and nut are flush against the fixture, then torque the nut to the recommended value.
Compatibility is highest with solid concrete substrates. Avoid using these fixings near the edge of concrete slabs, as this can lead to spalling or reduced pull-out strength. Periodically inspect installed bolts for signs of loosening or corrosion if exposed to high-moisture conditions.
