UK Radiators Pipe Covers - 200mm - Black

While the factory gloss finish is designed to be durable, you can paint them if you use a plastic-adhesion primer first, though the finish may not match the original gloss.

Yes, they are made from PVC designed to withstand the temperatures typically associated with domestic central heating radiator pipes.

It is recommended to turn the heating off and let the pipes cool down before installation for safety and to prevent the plastic from becoming too pliable during the snap-on process.

These are designed for standard 15mm radiator pipework, which is the most common size found in UK residential properties.

Yes, the snap-on design allows for easy removal and re-installation if you need to access the pipes or valves for maintenance.

Check for debris on the pipe or ensure the cover is perfectly aligned. If the pipe is slightly thicker than standard, verify there is no paint buildup preventing the seam from locking.

Measure the distance from the floor to the valve base again and carefully trim the excess length using a fine-toothed hacksaw for a clean edge.

Small surface scuffs on the gloss finish can often be buffed out using a mild plastic polishing compound; avoid using steel wool.