Rejs Soft Close Ball Bearing Drawer Runners - L-400, H-45

These runners are specified as L-400 (400mm length) and H-45 (45mm height).

Screws are typically not included, as the type and length required can vary based on the cabinet and drawer material.

While durable, these runners are designed for standard cabinetry loads. For exceptionally heavy drawers, it's advisable to consult a professional or consider heavy-duty rated runners.

The soft-close mechanism is designed to engage automatically when the drawer is gently pushed closed beyond a certain point. Avoid slamming the drawer; a smooth, controlled push is best.

They are made from galvanized clear zinc for durability and corrosion resistance.

Cutting ball bearing drawer runners is generally not recommended as it can damage the internal mechanism and affect performance. It's best to select runners that match your required length.

Ensure the runner is correctly installed and aligned. Check for any obstructions in the ball bearing track or the soft-close mechanism. Verify that the drawer is not excessively overloaded or misaligned.

Check for debris within the ball bearing channels and clean thoroughly. Ensure mounting screws are not overtightened, which can warp the runner. Confirm the drawer itself is not binding against the cabinet.

Re-check drawer and cabinet alignment. The soft-close often requires a specific gentle push to activate; ensure you are not forcing the drawer. Verify the runner has not been damaged during installation.