Diall Simplex Zinc-Plated Steel Wire Rope Clamp - Silver

This clamp is designed for standard wire rope constructions. Ensure the clamp's size designation matches the diameter of your wire rope for a secure fit.

For most general-purpose applications, it is recommended to use at least two clamps. Space them apart according to manufacturer guidelines, typically 6 times the rope diameter, to ensure adequate holding strength.

No, this clamp is intended for general-purpose use and is not rated for critical overhead lifting applications where failure could result in injury or significant damage. Always use appropriately rated hardware for lifting.

Ensure the clamp is correctly oriented (U-bolt on the dead end, saddle on the live end) and tighten the nuts evenly. Avoid overtightening, which can crush the wire strands. Using a thimble can help maintain the loop's shape and protect the rope.

The zinc plating provides a basic level of corrosion resistance, helping to protect the steel from rust and extend its service life in moderately damp or exposed conditions.

It is generally recommended to replace wire rope clamps after they have been used and subjected to load, especially if they show signs of deformation or damage. Reusing them may compromise their holding strength.

Ensure the clamp is the correct size for the wire rope. Verify that the nuts have been tightened to the appropriate torque. Check that the U-bolt is on the dead end of the rope and the saddle is on the live end. Confirm that the wire rope is seated correctly in the saddle.

For light surface rust, gently clean with a wire brush. If corrosion is deep or compromising the clamp's integrity, replace the clamp immediately. Consider using stainless steel clamps for more corrosive environments.

Ensure the threads are clean and free of debris. Use a wrench of the appropriate size to avoid stripping the nuts. If the nuts are seized, apply a penetrating lubricant and allow it to soak before attempting to loosen or tighten.