Afit Door Handles With Latch - Gold

These handles are designed for standard internal doors and are suitable for both left and right-hand opening doors.

Basic DIY tools are typically required, including a screwdriver and potentially a saw to cut the spindle to size if needed. A drill might be necessary for new installations.

Clean the handles with a soft, damp cloth and dry them thoroughly. Avoid using abrasive cleaners or chemicals that could damage the polished finish.

The kit includes all necessary screws, the tubular latch, the anti-rattle adjustable keep, and a 100mm spindle that can be cut to size.

Yes, the included spindle is designed to be cut. If a different length is required, standard spindles are readily available at hardware stores.

These handles are primarily designed for internal use. For exterior doors, it's recommended to use hardware specifically rated for outdoor conditions.

Ensure all screws on the backplate are tightened securely. If the spindle is too short, it may need replacing with a longer one, or ensure it's fully engaged with both handles.

Check for obstructions in the latch hole or the keep. Ensure the spindle is correctly aligned and the handles are properly seated. Lubricate the latch mechanism with a light household oil if necessary.

Adjust the position or depth of the anti-rattle keep on the door frame. Ensure the strike plate aligns correctly with the latch bolt.

The internal spring may require lubrication. Apply a small amount of light household oil to the spindle and moving parts of the handle mechanism. If the issue persists, the mechanism might be faulty.