Best current price£5.59from PCHUB.UK
Shopping.co.uk recommended and popular offers
PCHUB.UK£5.59Visit shop Cables Direct Grey Ert-600 Networking Cable 0.5 M Cat6 U/Utp (Utp)
Visit shop
B&Q£6.22Visit shop B&Q - Ethernet Network Cable Cat6 Gigabit Rj45 Copper Internet Patch Lead Grey 4M
Visit shop5 offers from £5.59 - £12.94
View price history by clicking the chart icon.
The Cables Direct ERT-600 is a high-performance 0.5-meter Cat6 networking cable designed for users who need a reliable, short-distance connection for Gigabit Ethernet devices. It is ideal for tidying up rack setups or connecting equipment in close proximity, offering superior crosstalk reduction compared to Cat5 standards. Please note that at 0.5 meters, this cable is intended exclusively for short-range patches and is not suitable for long-distance home or office wiring.
| Series | Cat6 |
|---|---|
| Model Part Number | ERT-600 |
| Brand | Cables Direct |
While this is a Cat6 cable rated for 250 MHz, it is primarily designed for Gigabit Ethernet (1 Gbps) standards. Performance at 10Gbps is not guaranteed over Cat6 and typically requires Cat6a cabling.
No, this is a U/UTP (Unshielded Twisted Pair) cable. It relies on the twisted pair design for signal integrity rather than additional foil shielding.
The frequency rating indicates the maximum bandwidth capacity of the cable. A 250 MHz rating allows for the high data throughput required by the Cat6 standard.
Yes, because it is U/UTP and short in length, it is quite flexible and easy to route within small cabinets.
The connectors are standard RJ-45 male plugs designed for reliable connectivity within the specified network standards.
Verify that the RJ-45 connector is fully seated and clicked into the port on both the source and the target device.
Ensure that the ports at both ends of the connection are rated for Gigabit Ethernet; otherwise, the speed will be limited by the slowest hardware component.
Inspect the connector pins and the cable jacket for physical damage. If the cable has been bent severely or crushed, the internal wiring may be compromised.
Installing the ERT-600 is straightforward as it is a plug-and-play component. Simply insert the RJ-45 male connector into the Ethernet port of your networking device until you hear a distinct "click."
