Thistle Bond-It Ready Mixed Plaster & Bonding Agent - Green

Coverage depends on the surface. Check the tub for the specific coverage rate per litre. Generally, one 10L tub covers a significant area.

It is designed for smooth, non-porous surfaces like painted walls. Always check compatibility with the specific surface before application.

Drying time varies depending on environmental conditions. Refer to the product label for specific drying times, usually a few hours.

No, Thistle Bond-It is ready-mixed and should be applied directly from the tub without dilution.

Thistle Bond-It is compatible with Thistle BondingCoat and MR plasterboards.

Clean up spills immediately with water while the product is still wet. Dried Bond-It may be more difficult to remove.

Ensure the surface was properly prepared (clean, dry, and free of loose materials) and that the Bond-It was fully dry before plastering.

Use the green colour as a guide to ensure full and even coverage. Apply a second coat if necessary, especially on very smooth surfaces.