Minotaur Mixing Paddle - 100 x 600mm
Best current price£6.58from Travis Perkins
Best offers
Shopping.co.uk recommended and popular offers
Travis Perkins£6.58Visit shop Minotaur Mixing Paddle 100 x 600mm
Visit shopTravis Perkins£6.58Visit shop One Offer
1 offer from £6.58
View price history by clicking the chart icon.
Product Information
Full details
The Minotaur Mixing Paddle (100 x 600mm) is a versatile tool designed for contractors, tradespeople, and DIY enthusiasts who need a reliable solution for blending adhesives, plaster, and paint. Its primary benefit is a high-efficiency, curved design that reduces mixing time and physical effort when attached to a power drill; however, users must ensure they have a drill with at least a 10mm chuck to accommodate the shaft size.
All features
| Model Part Number | 775067 |
|---|---|
| Brand | Minotaur |
Extended Product Information
FAQs
Can I use this with a standard 8mm drill?
No, this paddle requires a minimum 10mm chuck to securely hold the shank.
Is this suitable for mixing concrete?
This is designed for adhesives, plaster, and paint. It may struggle with heavy aggregate concrete, which typically requires a heavy-duty professional mixer.
How do I prevent material from splashing?
Submerge the paddle completely before starting the drill and begin at the lowest speed setting.
Will this rust if left in a damp garage?
While the steel is robust, it is susceptible to rust if stored wet. Always wipe it dry after cleaning.
Can I use this with a cordless drill?
Yes, as long as the drill has a 10mm chuck and sufficient torque to handle the viscosity of the material being mixed.
Troubleshooting
Paddle slips inside the drill chuck
Ensure the drill chuck is fully tightened and that the paddle shaft is centered. If slippage continues, clean the shaft of any grease.
Excessive vibration during use
Check that the paddle shaft is not bent and ensure the drill is running at a consistent, moderate speed rather than fluctuating.
Pros and Cons
Pros
- Reduces manual fatigue during long mixing sessions
- Sturdy build quality ensures long-term reliability
- Versatile enough to handle thick adhesives and thin paints
- Optimized design minimizes air bubbles in mixtures
Cons
- Requires a drill with a minimum 10mm chuck size
- Not suitable for very small handheld containers
- Long shaft length requires extra storage space
Setup, Compatibility & Care
To set up the paddle, simply insert the shank into your drill's chuck and tighten it securely. Ensure the chuck is fully tightened to prevent slipping under torque. It is compatible with any electric drill featuring a 10mm (3/8 inch) or larger chuck. After each use, it is critical to clean the paddle immediately while the material is still wet; hardened plaster or adhesive can be difficult to remove and may affect the balance of the paddle. Use a stiff brush and water to remove residue, then dry the tool completely to prevent rust.
Similar items
Amtech Paint Mixer - 430mm x 80mmFrom £7
Toolty Mixing Paddle Stirrer Agitator Whisk Mixer - 60X320X6mm - Hex - TLTY-1300From £7
Faithfull Posthole Digging Bar - Chisel EndFrom £41
Telescopic Paint Roller - 9" Head - 1.6m-2.6m - HardysFrom £20
Roughneck Sharp-Edge Dutch Hoe - YellowFrom £24
Woof Wear Gel Fusion Riding Whip - Turquoise - 60cmFrom £13
Faithfull Mixing Paddle - 80 x 400mmFrom £6
SolaDirect Cultivator - 5 ProngFrom £23
Red Gorilla Telescopic Broom - Red - 50cmFrom £24
Guideline F.I.T.S Tube NeedleFrom £22
Komodo Aerobic Weighted Exercise Bar - 2kgFrom £19
Darlac Snapper Long Reach Pruner - DP110-1000From £44