Foot Spa Massager with Removable Pedicure Stone - Lake Blue

The water temperature can be adjusted from 35℃ to 46℃.

No, the foot spa is designed to be used with water for heating and massage functions. Operating it without water may damage the unit.

Remove the beads and rollers from the unit and wash them with warm, soapy water. Rinse and ensure they are completely dry before reattaching or storing.

The pedicure stone is designed to gently exfoliate dead skin from your feet, particularly on the heels and soles, leaving them smoother.

The foot spa features a 1-hour auto shut-off function for safety and energy saving.

The foot spa is designed to accommodate most adult foot sizes, but users with exceptionally large feet should check the internal dimensions if possible.

It is generally recommended to use only water. Additives like bath salts or oils may damage the internal components and void the warranty.

Ensure the power cord is securely plugged into a working electrical outlet. Check if the auto shut-off function has been activated; if so, unplug and replug the unit.

Verify that the temperature control is set correctly and that the unit has been running for sufficient time to heat the water. Ensure the water level is above the minimum fill line.

Check the selected mode on the control panel. Ensure the unit is plugged in and powered on. Clean any debris that might be obstructing the jets or vibration mechanism.

Confirm that the rollers are properly attached and aligned. Ensure the vibration mode is activated, as some rollers may operate in conjunction with this mode.