illuburg Motion Detector Ceiling Recessed Installation PIR with Day/Night Sensor Range 8 Metres

The maximum detection range is 8 meters. This can be adjusted to 25%, 50%, or 75% of the maximum range.

The detector can handle electrical appliances and LED lighting up to 400W.

No, this model is non-dimmable and is designed for simple on/off switching functionality.

It requires a recessed ceiling installation. The cutout dimensions are 65 x 60 mm (diameter x height).

The starting time (time delay) can be adjusted through integrated controls, with options ranging from 5 seconds to 30 minutes.

The ambient temperature range (ta) for operation is -25 to 50 °C.

Yes, it features a daylight sensor with adjustable sensitivity (50 lux) to prevent activation when sufficient ambient light is present.

Check that the power is on. Verify that the wiring connections are secure. Ensure the connected load does not exceed the 400W limit. Test settings by temporarily increasing sensitivity and reducing the time delay.

Adjust the detection range to a lower setting. Check for heat sources or moving objects (like curtains) within the detection zone. Reduce the sensitivity of the daylight sensor if it's too low.

Ensure the time delay is set correctly. Check if continuous motion is being detected. Verify that the connected load is within the specified power limit.

Ensure the lux setting is appropriate for the ambient light conditions. Clean the sensor lens.