Best current price£69.99from Amazon
Shopping.co.uk recommended and popular offers
Amazon£69.99Visit shop Floor Nation Red Big Spin Hurricane 5Mm Tile Levelling System Kit – 400 Piece Set (100 Caps + 300 Spacer Bases) – Pro Tile Leveling Clips For Large Format Floor & Wall Tiles Up To 25Mm – Reusable Tiling Spacers
Visit shop2 offers from £69.99
View price history by clicking the chart icon.
The Big Spin Deep Hurricane Tile Levelling System is designed for professional tilers and DIY enthusiasts who demand a flat, lippage-free finish for large format floor and wall tiles. By maintaining perfect alignment between adjacent tiles during the curing process, this system ensures a professional-grade aesthetic across ceramic, porcelain, natural stone, and LVT installations. While it is highly economical due to its reusable components, users should note that it requires careful removal once the adhesive has fully set to avoid disturbing the tile placement.
| Model Part Number | BSHDK419 |
|---|---|
| Brand | Floor Nation |
No, this system is rated for tiles up to 25mm thick. Attempting to use it on thicker material may prevent the cap from threading onto the base properly.
No, the spacer bases are designed to be single-use and remain within the mortar bed once the tile is set.
No, the caps are designed for manual tightening. No extra tools are required.
Yes, it is suitable for marble, provided the tile thickness is within the 25mm limit.
Once the adhesive has cured, you can typically snap the spacer bases off by striking them in the direction of the grout joint using a rubber mallet.
The system is compatible with 5mm wedges, but the kit primarily includes the screw-cap and base system.
Ensure that mortar has not entered the threads of the cap during installation. Use a light tap with a rubber mallet if the cap is stuck due to dried adhesive.
Check that the spacer base is centered and fully seated under the tile. Ensure that the mortar bed is not too dry, which can prevent the tile from moving into alignment.
To set up the system, ensure your surface is prepared and your adhesive is mixed to the manufacturer's consistency. Slide the spacer base under the tile edge, apply your next tile, and secure it with the cap. For care, once the adhesive is fully cured, twist the caps off in a counter-clockwise direction. Clean any residual thin-set from the caps immediately with a damp cloth or sponge to keep the threads smooth for future use. The spacer bases are left behind in the mortar joint and are designed to be broken off once the adhesive is hardened, leaving the grout line clear for finishing.
