Best current price£389.00from Wowcher.co.uk
Shopping.co.uk recommended and popular offers
Wowcher.co.uk£389.00Visit shop Morden Furniture World Ltd Inflatable Hot Tub With Bubble Massage System - 3 Styles | Wowcher
Visit shop1 offer from £389.00
View price history by clicking the chart icon.
The Lay-Z-Spa St Lucia AirJet hot tub is designed for individuals or couples seeking a relaxing, heated soak at home. Its key benefit is enhanced energy efficiency, making it up to 40% more efficient than similar portable spas, thanks to its EnergySense® insulation. A potential consideration is its 2-person capacity, which may be limiting for larger groups.
| Model Part Number | St Lucia AirJet |
|---|---|
| Brand | Lay-Z-Spa |
Heating time can vary depending on the ambient temperature and the desired water temperature. On average, it takes approximately 6-12 hours for the water to reach its maximum temperature (40°C / 104°F) from a cold start.
It is recommended to check and adjust the water chemistry daily or every other day, especially during periods of frequent use. The ChemConnect® dispenser helps maintain chlorine levels, but pH and alkalinity should be monitored regularly.
Yes, the Freeze Shield® technology is designed to protect the hot tub from freezing when not in use by maintaining internal temperatures just above freezing. However, for optimal performance and safety, avoid prolonged operation of the heating and jet systems in extreme sub-zero conditions.
Typically, Lay-Z-Spa products come with a limited manufacturer's warranty. The pump unit usually has a 12-month warranty, while the liner has a 6-month warranty. Please refer to your product documentation for exact terms and conditions.
To clean the liner, turn off the pump and unplug the unit. Drain the hot tub completely. Use a soft cloth with mild soap and water to wipe down the interior and exterior surfaces. Rinse thoroughly and allow it to air dry completely before refilling or storing.
No, it is strongly recommended to plug the hot tub directly into a properly grounded household outlet. Using extension cords can be a safety hazard and may affect the performance and grounding detection system.
The hot tub requires a dedicated circuit with a Ground Fault Circuit Interrupter (GFCI) protected outlet. The specific amperage requirement is detailed in the product manual, but it's typically around 12-15 amps.
Ensure the pump is set to the inflation mode and that the air valve is securely closed after inflation.
Check that the heater function is activated and the set temperature is higher than the current water temperature. Verify the power connection and ensure the filter is not clogged.
Ensure the AirJet function is activated. Check that the water level is sufficient, as the jets require a minimum water depth to operate correctly. Ensure the filter is clean.
Consult the product manual for a specific list of error codes and their corresponding solutions. Common codes relate to water flow, temperature, or grounding issues.
Clean or replace the filter cartridge. Ensure the air intake for the AirJet system is not obstructed.
Ensure the hot tub is plugged into a properly grounded outlet. Test the outlet with another appliance. If the issue persists, contact customer support.
Setup:
Compatibility:
Care:
