Hahnel Captur Remote Control and Flash Trigger - Sony

Setup, Compatibility & Care

Setup:

1. Insert the appropriate batteries (AA batteries included) into both the transmitter and receiver.
2. Connect the receiver to your Sony camera using the included cable.
3. Attach your flashgun to the receiver (if using).
4. Turn on both the transmitter and receiver.
5. Select the desired channel to avoid interference with other devices.

Compatibility:

The Hahnel Captur is compatible with a range of Sony cameras: Sony A7 R SLR, Alpha 7 II, Alpha 7, Alpha 7S Mirrorless a7s, Alpha a3000, ALPHA A77 SLR, Alpha DSLR-350, Alpha DSLR-A100, Alpha DSLR-A200, Alpha DSLR-A300, Alpha DSLR-A450 SLR, Alpha DSLR-A500 SLR, Alpha DSLR-A550 SLR, Alpha DSLR-A700, Alpha DSLR-A850 SLR, Alpha DSLR-A900, Alpha DSLR-A560, Alpha DSLR-A580, DSC-HX300, DSC-HX50V, DSC-HX60V, RX10, SLT A33 (SLT/Bridge), SLT A55 (SLT/Bridge), SLT-A35 (SLT), SLT-A37, SLT-A57 SLR, SLT-A58, SLT-A65 (Bridge), SLT-A99 SLR. Please refer to the product specifications for a complete list.

Care:

• Store the remote in a dry, safe place when not in use.
• Clean with a soft, dry cloth. Avoid using harsh chemicals.
• Remove the batteries if storing the device for an extended period.