MAXAM Maxcrete - 10kg
Best current price£186.31from Amazon
Best offers
Shopping.co.uk recommended and popular offers
Amazon£186.31Visit shop MAXAM Maxcrete - High Strength Concrete Repair (10kg)
Visit shopAmazon£186.31Visit shop One Offer
1 offer from £186.31
View price history by clicking the chart icon.
AmazonMAXAM Maxcrete - High Strength Concrete Repair (10kg)
Free delivery in 1–3 days
£186.31
Visit shop
Product Information
Full details
MAXAM Maxcrete is an essential repair solution for homeowners, contractors, and maintenance professionals looking to restore damaged concrete or granolithic surfaces. Its primary benefit is its exceptional versatility, allowing for effective repairs in challenging environments like underwater, wet conditions, or temperatures as low as 0°C. While it offers a professional-grade, rapid-setting finish, users should be prepared for its fast 30-minute curing time, which requires efficient application and smoothing once mixed.
All features
| Model Part Number | 004005 |
|---|---|
| Brand | MAXAM |
Extended Product Information
FAQs
Can I use Maxcrete in freezing temperatures?
It is designed to work in temperatures as low as 0°C.
How long until I can drive my car over the repair?
The material is typically ready for vehicle traffic within 2 hours of application.
Is it suitable for vertical repairs like window sills?
Yes, its formula is effective for stairs, kerbs, and window sills.
Can I apply this underwater?
Yes, Maxcrete is specifically engineered to set even when submerged in water.
Does the repair resist oil stains?
Yes, once cured, the material is highly resistant to oils, grease, acids, and alkalis.
Can I sand the repair after it dries?
While it can be feather-edged for a smooth finish, it is a high-strength concrete, so manual sanding is not recommended; use a trowel for finishing while the product is still workable.
Troubleshooting
Mix is hardening too quickly in the bucket
Reduce the batch size to ensure it can be applied within 10-15 minutes, or work in cooler temperatures if possible.
Repair is not bonding to the existing surface
Ensure the original concrete was thoroughly cleaned of all dust, grease, and loose material prior to applying the Maxcrete.
Finish is too rough
Use a damp steel trowel during the final setting stages to smooth the surface and feather-edge the perimeter.
Pros and Cons
Pros
- Sets in wet and underwater environments
- Extremely fast setting time of 30 minutes
- Drive-over capability in just 2 hours
- High resistance to common chemicals and oils
- Suitable for feather-edging
Cons
- Rapid set time requires fast application speed
- Limited working time before the mix begins to harden
- Not suitable for large structural slab pours
- Requires careful surface preparation for best results
Setup, Compatibility & Care
Before application, ensure the substrate is free from loose debris, moss, or oil residue. For optimal adhesion, the surface should be clean. Because the product contains a pre-blended mix, follow the manufacturer's ratio for the liquid binder to ensure the correct consistency. Given the fast-setting nature of Maxcrete, mix only what you can apply within 15-20 minutes. After the repair, avoid disturbing the surface until the initial set has occurred. Once cured, the surface requires minimal maintenance due to its innate resistance to oils and grease; simply pressure wash or sweep as needed for regular upkeep.