Best current price£259.99from B&Q
Shopping.co.uk recommended and popular offers
B&Q£259.99Visit shop B&Q - Quixhill Round Framed Led Touch Sensor Mirror With Demister & Strap800mmChrome/grey
Visit shop2 offers from £259.99
View price history by clicking the chart icon.
This Balterley Round Framed Mirror in Grey is designed for homeowners seeking to enhance their bathroom's ambiance with modern lighting and a space-saving solution. Its primary benefit is the integrated bright LEDs and demister pad, which illuminate and keep the mirror clear, creating a brighter and more functional space. A potential caveat is that it requires electrical connection, necessitating professional installation in compliance with bathroom zone regulations.
| Colour | Grey |
|---|---|
| Brand | Balterley |
The Balterley Round Framed Mirror comes with a 1-year manufacturer's guarantee.
No, due to the electrical components (LEDs and demister), this mirror must be installed by a qualified electrician in accordance with bathroom electrical regulations.
This mirror is IP44 splashproof and suitable for installation in zones 2 and 3 of your bathroom.
The demister pad is activated using the touch sensor on the mirror surface. Typically, a single touch will turn it on, and another touch will turn it off.
The mirror measures 800 mm in width, 800 mm in height, and has a depth of 40 mm.
The product weighs approximately 10 KG.
Mounting hardware for the wall is not typically included, as the type of fixing required depends on your wall material (e.g., plasterboard, brick). Your electrician will advise on suitable fixings.
Ensure the mirror is properly connected to a live power source. Check that the circuit breaker or fuse for the bathroom is not tripped. Verify the touch sensor is functioning correctly; try cleaning it gently.
Confirm the demister function is activated via the touch sensor. Ensure the mirror is correctly wired and receiving power. The pad may take a few minutes to fully clear heavy condensation.
Wipe the sensor area with a soft, dry cloth to remove any smudges or moisture. If the issue persists, it may indicate a fault with the sensor, and professional assessment is recommended.
Use a clean, soft microfibre cloth and a mild glass cleaner or just water. Ensure you dry the mirror thoroughly after wiping to prevent streaks.
Setup: This mirror requires a mains power connection for the LED lights and demister pad. It must be installed by a qualified electrician, adhering to the UK Building Regulations for electrical installations in bathrooms, specifically in zones 2 and 3. The fixing strap should be securely attached to the wall using appropriate hardware (not included) for the wall type.
Compatibility: The mirror is designed for bathroom use and is IP44 splashproof, making it suitable for installation in zones 2 and 3.
Care: Clean the mirror surface regularly with a soft, damp cloth. Avoid abrasive cleaners or solvents that could damage the finish or the mirror. For the LED and demister functions, ensure the power supply is switched off at the mains before cleaning any electrical components. Wipe the frame and strap with a slightly damp cloth and dry immediately.
