Best current price£41.95from eBay
Shopping.co.uk recommended and popular offers
eBay£41.95Visit shop Strymon MIDI-EXP 5-Pin DIN Right-Angled MIDI Plug To 6.35mm TRS Straight Jack...
Visit shop1 offer from £41.95
View price history by clicking the chart icon.
For guitarists using Strymon Riverside or Sunset pedals, the MIDI-EXP cable unlocks advanced MIDI control and preset management. Its primary benefit is enabling remote control and saving/loading of up to 300 presets. A minor caveat is its specific length of 75 cm, which may require consideration for pedalboard layout. This cable provides a right-angled 5-pin MIDI connector and a straight 1/4" TRS jack, facilitating full MIDI integration for hands-free operation and extensive preset recall.
| Model Part Number | MIDIEXPRIGHTANGLEMIDISTRAIGHT1/4INCH |
|---|---|
| Brand | Strymon |
This cable is specifically designed for the Strymon Riverside and Strymon Sunset pedals to enable their MIDI EXP functionality.
The cable is 75 cm long.
Yes, the cable allows for full control of all knobs and switches on the compatible pedals via MIDI.
You can save and load up to 300 drive presets for your Riverside or Sunset pedal.
No, this is a hardware connection cable. MIDI functionality is controlled by your external MIDI controller and the internal settings of your Strymon pedal.
This particular cable is designed for the Riverside and Sunset pedals. Other Strymon pedals may use different connection types for MIDI or expression control.
The MIDI-EXP cable has a specific configuration: a right-angled 5-pin MIDI connector on one end and a 1/4" TRS jack on the other, designed to interface with the EXP port of compatible Strymon pedals. Standard MIDI cables typically have 5-pin DIN connectors on both ends for communication between MIDI devices.
Verify that the MIDI-EXP cable is securely connected to both the pedal and the MIDI controller. Check that the MIDI controller is sending MIDI messages on the correct channel and that the pedal's MIDI channel is correctly set (refer to the pedal's manual). Ensure the MIDI controller's output is set to 'On' or 'Active'.
Confirm that the cable is fully seated in both ports. Ensure you are following the correct procedure for saving and loading presets as outlined in the Strymon pedal's manual. Check for any MIDI errors reported by your controller.
Inspect the cable connectors for any debris or damage. Try a different MIDI cable to rule out a faulty cable. Ensure the cable is not being pulled or stressed at the connectors.
Setup: Connect the right-angled 5-pin MIDI connector to the 'EXP' jack on your Strymon Riverside or Sunset pedal. Connect the straight 1/4" TRS jack to the MIDI OUT port of your MIDI controller or master MIDI device. Ensure your MIDI controller is configured to send appropriate MIDI messages to control the connected pedal.
Compatibility: Primarily designed for the Strymon Riverside and Strymon Sunset pedals. Ensure your MIDI controller or system supports MIDI communication.
Care: Keep the cable clean and dry. Avoid excessive bending or kinking of the cable. Store in a protected environment when not in use to prevent damage to the connectors and cable integrity.
