Smartseal Concrete Floor Sealer - 5L

Drying times vary. Always refer to the product label, but typically, it will be dry to the touch in a few hours and fully cured within 24 hours.

No, this product is specifically designed for internal use.

You'll need a roller, sprayer, or brush, along with appropriate personal protective equipment, such as gloves and eye protection.

For optimal results, apply two thin coats, allowing the first coat to dry completely before applying the second one.

The lifespan depends on foot traffic and use, but with proper application and maintenance, the sealer can last for several years.

No, the existing paint needs to be removed before application. It's best applied to bare concrete for maximum penetration and effectiveness.

Clean up spills immediately with a suitable cleaning agent. For oil spills, use a degreaser before wiping the surface.

The Smartseal Concrete Floor Sealer is ideal for use in kitchens, factories, warehouses, sheds, garages, and workshops.

Ensure the concrete surface is clean and free of sealers or coatings that can prevent penetration. Consider light sanding if necessary.

Apply the sealer evenly, avoiding excessive build-up in any one area. Two thin coats are often better than one thick coat.

Ensure the product has fully cured. If the problem persists, the application may have been too heavy. Consider a light degreasing and reapplication.