Gira KNX DALI Gateway Color - 211100
Best current price£347.87from Tameson UK
Best offers
Shopping.co.uk recommended and popular offers
Tameson UK£347.87Visit shop Gira Knx Dali Gateway Color 1V Din Rail Secure - 211100
Visit shopTameson UK£347.87Visit shop One Offer
1 offer from £347.87
View price history by clicking the chart icon.
Tameson UKGira Knx Dali Gateway Color 1V Din Rail Secure - 211100
Free delivery in 1–3 days
£347.87
Visit shop
Product Information
Full details
The Gira KNX DALI Gateway Color is designed for professional integrators and building automation experts looking to bridge DALI lighting systems with KNX infrastructure. It delivers high-precision control over color temperature and brightness for up to 64 devices, making it an essential component for modern, responsive smart lighting environments. Users should note that this device requires familiarity with the ETS (Engineering Tool Software) environment for initial configuration and commissioning.
All features
| Model Part Number | 211100 |
|---|---|
| Brand | Gira |
Extended Product Information
FAQs
Does this gateway require a separate DALI power supply?
Yes, a DALI power supply is required to energize the DALI control line for the connected luminaires.
How many devices can I control with one gateway?
The gateway supports up to 64 individual DALI-compatible lighting addresses.
Can I control color temperature with this device?
Yes, the gateway supports Tunable White (Device Type 8), which allows for dynamic color temperature control.
Is this device compatible with standard DALI (v1) lamps?
Yes, it is backward compatible with DALI and also supports the newer DALI-2 standard.
How do I configure the light scenes?
Scenes are configured using the ETS software plug-in, where you can define specific brightness and color values for up to 16 scenes.
Does it report power failures?
Yes, the gateway provides feedback on power supply failures to the KNX bus for monitoring purposes.
Troubleshooting
Gateway is not detected in ETS.
Check the KNX bus connection and ensure the bus power supply is active. Verify that the device address has been properly assigned.
DALI lights are not responding to KNX commands.
Verify that the DALI line is powered correctly and check the wiring for short circuits. Ensure lamps are correctly mapped to groups in the ETS plug-in.
Feedback shows a permanent lamp error.
Check the specific DALI luminaire for a burned-out bulb or a failed DALI driver module.
Pros and Cons
Pros
- Seamless integration between DALI and KNX ecosystems
- Support for Tunable White (DT8) color control
- Comprehensive monitoring of lamp and system status
- Compact DIN rail-mounted form factor
- Reliable protection against electrical faults
Cons
- Requires professional knowledge of ETS software
- Not suitable for non-KNX based home automation systems
- Physical installation requires DIN rail space
Setup, Compatibility & Care
- Mounting: Snap the gateway onto a standard 35mm DIN rail within your distribution board.
- Wiring: Connect the KNX bus cable and the DALI control line (DALI requires two wires, polarity-independent) to the corresponding terminals.
- Commissioning: Launch your ETS project, import the device-specific product database, and use the integrated plug-in to discover DALI participants and assign them to KNX groups.
- Compatibility: Ensure all connected luminaires are DALI or DALI-2 certified to guarantee full functionality with the Device Type 8 standard.
- Maintenance: Regularly check your KNX diagnostic logs for power failure reports. The device is maintenance-free, but ensure the distribution cabinet remains free of excessive dust or moisture to prevent heat buildup.