Fablon Sticky Back Plastic - Transparent Glossy

Fablon works best on smooth, non-porous surfaces like wood, glass, metal, and plastic.

Gently lift an edge and slowly peel it off. Use a hairdryer to apply heat to the adhesive if it's difficult to remove.

Fablon is generally not designed for reuse, as the adhesive may lose its stickiness after removal.

Wipe the surface with a damp cloth or a mild cleaner. Avoid abrasive cleaners.

Lift the film gently from the edge and smooth it back down using a smoother tool or a soft cloth, working towards the bubble.

Yes, Fablon provides a protective layer that helps prevent scratches on the covered surface.

No, it is not recommended to use Fablon on textured walls, as it may not adhere properly.

Fablon is water resistant, protecting the surface from spills and moisture.

Lift the film gently from the edge and smooth it back down using a smoother tool or a soft cloth, working towards the bubble.

Ensure the surface is clean and dry. Use a heat gun to activate the adhesive. Make sure you are applying to a smooth surface.

Trim any excess film. Apply a little heat with a hairdryer to reactivate the adhesive, and press down firmly on the edges.

Carefully remove the damaged section, trim a new piece and reapply. Avoid applying too much pressure or using sharp objects.