VonHaus Electric Stove Heater - 1500W

The heater has two power settings: 750W and 1500W. The electricity consumption will depend on which setting you use and for how long. For example, at 1500W, it uses 1.5 kilowatt-hours (kWh) per hour of operation.

Yes, the VonHaus Electric Stove Heater features a stand-alone flame on/off switch, allowing you to enjoy the realistic LED flame effect for ambiance without engaging the heating function.

This heater is designed to effectively warm rooms up to 12 square meters (12m²). It is best suited for supplementary heating in smaller to medium-sized rooms.

Yes, safety is a key feature. The heater includes an auto shut-off function to prevent overheating and a thermal cut-out switch, making it a safer alternative to a real fire, even with children or pets present.

The easy-access control panel, located behind the tempered glass window, allows you to adjust the brightness of the LED flame, along with temperature and power settings.

The compact and portable stove heater measures H45 x W40.5 x D24cm.

No special installation is required. Simply place the unit on a stable surface and plug it into a standard electrical outlet.

All VonHaus products, including this electric stove heater, are backed by a minimum 2-year warranty.

Ensure the heater is securely plugged into a working electrical outlet. Check your home's circuit breaker to make sure it hasn't tripped. If the heater has been recently moved, ensure it hasn't accidentally activated the tip-over safety switch (a common feature for electric heaters, even if not explicitly stated for this model).

Check that the heat settings (750W or 1500W) are selected and the adjustable thermostat is set to a temperature higher than the current room temperature. The flame effect operates independently, so it can be on without the heating function.

The auto shut-off (overheating protection) or thermal cut-out switch may have been activated. This usually happens if the heater is too close to an obstruction, or if its air vents are blocked. Unplug the unit, allow it to cool for at least 10-15 minutes, ensure vents are clear, and then plug it back in. Reposition the heater if necessary to allow for proper airflow.