Drennan Easy Fit Bungee Bush - Margin 3.2mm
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
The Drennan Easy Fit Bungee Bush (Margin 3.2mm) is designed for serious anglers who demand a reliable, friction-free elastic exit for their pole rigs. It is perfect for those using heavy-duty elastics when targeting large margin carp, offering a seamless transition for the line that prevents tangles. The primary benefit is its glue-free, secure installation, though users should note it is specifically optimized for Drennan top sections, requiring manual adaptation for other pole brands.
All features
| Brand | Drennan |
|---|
Extended Product Information
FAQs
Can I use this bush with hollow elastics?
Yes, the 3.2mm internal diameter is perfectly suited for most popular hollow and solid margin elastics.
Is glue required for a permanent fit?
No, the serrated design is intended to hold firmly without any adhesive.
How do I identify the size?
The Margin variant is color-coded in pink, which distinguishes it from the smaller diameter Match versions.
Will this fit a Shimano or Daiwa pole?
It is designed for Drennan poles but can be adapted for others by carefully sanding the pole tip to match the bush diameter.
Does the PTFE material affect line strength?
PTFE is chosen specifically because it is ultra-low friction, which preserves the life of your elastic and prevents heat build-up.
Troubleshooting
Bush feels loose in the pole tip
The pole tip may be slightly too large. Apply a very thin layer of PTFE tape around the bush serrations to create a tighter interference fit.
Bush is difficult to insert
Check for carbon burrs inside the pole tip and ensure the tip is not ovalized. You may need to lightly chamfer the inside edge of the pole.
Pros and Cons
Pros
- No glue or permanent modification required
- Extremely smooth surface reduces elastic wear
- Easy to remove or swap between kits
- Highly visible color coding
- Rugged design suitable for heavy-duty margin fishing
Cons
- Not a guaranteed fit for non-Drennan pole brands without modification
- Requires careful measurement of pole tip before purchase
- Limited to specific internal diameter of 3.2mm
Setup, Compatibility & Care
Installation is straightforward due to the 'Easy Fit' design. Ensure your pole tip is clean and free of debris before insertion. Simply push the bush into the tip section; the serrated outer edges will bite into the carbon, securing it firmly. If you are using this on a non-Drennan pole, you may need to use fine-grit sandpaper to slightly adjust the carbon tip diameter for a perfect fit.
Maintenance is minimal: check the internal diameter after every session for any signs of line-wear grooves or debris. If the bush appears worn after heavy usage, it can be popped out easily, unlike glued bushes which often require cutting the pole tip down, thereby shortening your reach.