AB Tools Air Angle Sander - 2" / 50mm
Best current price£31.81from B&Q
Best offers
Shopping.co.uk recommended and popular offers
B&Q£31.81Visit shop B&Q - 2" 50mm Air Angle Sander Grinder Polisher With Hook And Loop Pad Sanding Pad
Visit shopB&Q£31.81Visit shop All Offers
2 offers from £31.81
View price history by clicking the chart icon.
B&QB&Q - 2" 50mm Air Angle Sander Grinder Polisher With Hook And Loop Pad Sanding Pad
Free delivery in 1–3 days
£31.81
Visit shop
eBay2"" 50mm Air Angle Sander Grinder Polisher With Hook and Loop Pad Sanding Pad
Free delivery in 1–3 days
£31.81
Visit shop
Product Information
Full details
This AB Tools Air Angle Sander is designed for professionals and DIY enthusiasts working on detailed tasks, offering precise control for sanding, rust removal, and weld smoothing in tight spaces. Its key benefit is the compact, lightweight design combined with a dual-action motion for efficient material removal. A caveat is its specific requirement for a 1/4" BSP air inlet and 4 CFM air consumption, necessitating compatible air compressor setups. Key features include a 90-degree angled head for accessibility, a free speed of 15,000 RPM for effective work, and a 2" / 50mm pad size ideal for intricate areas.
All features
| Model Part Number | AT573 |
|---|---|
| Brand | AB Tools |
Extended Product Information
FAQs
What type of air compressor is required for this sander?
You will need an air compressor that can supply at least 4 CFM (Cubic Feet per Minute) of air at 90 PSI (Pounds per Square Inch).
Can I use this sander for large areas?
No, this sander is specifically designed for small, restricted, and awkward areas due to its compact size and 50mm (2") pad. It is not suitable for large surface sanding.
What size sanding pads should I use?
The sander is designed for 50mm (2") Hook & Loop sanding pads.
How often should I lubricate the tool?
It's recommended to apply a few drops of air tool oil to the air inlet before each use or at least daily for regular users. Consistent lubrication ensures smooth operation and longevity.
What is the 'dual action' feature?
Dual action means the sander's pad moves in both a circular and an oscillating (figure-of-8) motion simultaneously. This helps to remove material efficiently while preventing swirl marks, leading to a smoother finish.
How do I connect the air hose?
The sander has a 1/4" BSP air inlet. You will need a corresponding 1/4" BSP male fitting on your air hose or coupler.
Troubleshooting
Sander not powering on or low power
Check air hose connection for leaks. Ensure air compressor is delivering sufficient pressure (90 PSI) and volume (4 CFM). Clean or replace air filter if clogged. Lubricate the tool with air tool oil.
Excessive vibration
Ensure the sanding pad is securely attached and balanced. Check if the pad or the sander's internal mechanism is damaged. Use firm, consistent pressure.
Poor sanding performance
Verify adequate air supply (90 PSI, 4 CFM). Ensure the abrasive disc is not worn out or clogged. Clean the air inlet and check for any internal blockages.
Sander stops intermittently
The air compressor may be running out of air. Check compressor tank pressure and refill if necessary. The tool may be overheating due to continuous high demand; allow it to cool.
Pros and Cons
Pros
- Excellent for working in confined and restricted areas.
- Dual-action motion provides a superior finish compared to single-action sanders.
- Lightweight design reduces operator fatigue during extended use.
- Precise control allows for detailed finishing work.
- Compact size makes it easy to handle and maneuver.
Cons
- Requires a compatible air compressor with at least 4 CFM air consumption.
- Pad size is limited to 2" (50mm), unsuitable for large surface areas.
- Noise levels may be high, potentially requiring hearing protection.
- Requires a 1/4" BSP air inlet connection.
- Dual-action may not be necessary for very basic rust removal tasks.
Setup, Compatibility & Care
Setup:
- Connect the sander to your air compressor using a 1/4" BSP male fitting and appropriate air hose.
- Ensure your air compressor can supply a minimum of 4 CFM at 90 PSI.
- Attach a 50mm (2") hook and loop sanding pad to the sander's spindle.
- Apply a small amount of air tool oil to the air inlet before the first use and periodically during operation for lubrication.
Compatibility:
- Requires an air compressor capable of delivering 4 CFM at 90 PSI.
- Uses standard 1/4" BSP air fittings.
- Designed for use with 50mm (2") Hook & Loop sanding pads and discs.
Care:
- Disconnect from air supply before maintenance.
- Periodically clean the air inlet screen to prevent debris from entering.
- Lubricate the tool regularly with air tool oil.
- Store in a dry place away from moisture to prevent corrosion.