Inspection Mirrors - 30mm + 50mm Round Circular Telescopic Extendable Mirrors 2pc Kit
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
This 2pc inspection mirror kit from AB Tools is designed for mechanics, engineers, and plumbers needing to view confined or hard-to-reach areas. The key benefit is the enhanced visibility provided by two different-sized mirrors with telescopic reach and 360-degree articulation. A potential caveat is that the smaller mirror's telescopic range is shorter than the larger one, which may limit access in extremely tight spaces.
All features
| Model Part Number | AN382_AN385 |
|---|---|
| Brand | AB Tools |
Extended Product Information
FAQs
What are the dimensions of the mirrors included in the kit?
The kit includes one 30mm round mirror and one 50mm round mirror.
What is the maximum reach of the inspection mirrors?
The 30mm mirror extends from 190mm to 605mm, and the 50mm mirror extends from 210mm to 385mm.
Can the mirror be angled in any direction?
Yes, both mirrors feature a 360-degree ball joint, allowing for full all-angle viewing.
Are these mirrors suitable for use in oily environments?
Yes, the non-slip grips are designed for use in oily conditions.
How do I clean the inspection mirrors?
Wipe the mirror surface with a soft, dry cloth. For tougher dirt, use a slightly damp cloth and dry thoroughly.
What professions are these mirrors intended for?
They are ideal for mechanics, engineers, plumbers, and anyone needing to inspect hard-to-reach areas.
Do the mirrors come with a protective case?
The product description does not specify a protective case. It is recommended to store them carefully to prevent damage.
Troubleshooting
Mirror is loose or wobbly
Ensure the telescopic sections are fully extended and twisted to lock into place. Check that the ball joint is tightened sufficiently for stable positioning.
Mirror is difficult to extend or retract
Clean the telescopic sections of any dirt or debris. A small amount of lubricant (like WD-40) can be applied sparingly to the sliding sections if needed, but ensure it does not drip onto the mirror surface.
Poor visibility or distorted image
Clean the mirror surface with a soft cloth. Ensure the mirror is positioned correctly to avoid glare from light sources.
Pros and Cons
Pros
- Provides two different mirror sizes for flexibility.
- Telescopic handles offer extended reach.
- 360-degree articulation allows for easy viewing angles.
- Non-slip grips enhance usability in various conditions.
- Suitable for a wide range of professional and DIY tasks.
Cons
- The shorter telescopic range of the 50mm mirror might be limiting for some very deep access needs.
- Mirrors are fixed round shapes, may not fit into extremely irregular cavities.
- Requires manual positioning for optimal viewing angle.
- Primarily designed for visual inspection, not for manipulation of components.
Setup, Compatibility & Care
Setup: These inspection mirrors require no setup. Simply extend the telescopic handle to the desired length by pulling or twisting the sections. The 360-degree ball joint can be adjusted manually to achieve the optimal viewing angle.
Compatibility: The mirrors are compatible with most inspection tasks where a visual check is required. They are suitable for use by mechanics, engineers, plumbers, and DIY enthusiasts.
Care: To maintain performance, wipe the mirror surfaces clean with a soft, dry cloth after each use. For tougher grime, use a slightly damp cloth and ensure the mirror is completely dry before retracting the handle. Avoid using abrasive cleaners that could scratch the mirror surface. Store in a dry place to prevent corrosion.