Best current price£5.98from Amazon
Shopping.co.uk recommended and popular offers
Amazon£5.98Visit shop StarTech 25cm Cat6 Slim Ethernet Cable, LSZH, Blue (N6PAT25CMBLS) | 28AWG copper, LSZH, Gold-plated RJ45, Patch Cable, Ethernet Cord, Snagless, Pure Bare, 250MHz bandwidth, 10Gbps speeds, 25cm
Visit shop3 offers from £5.98 - £10.60
View price history by clicking the chart icon.
This 25cm blue slim CAT6 Ethernet cable from StarTech.com is designed for high-density network installations where space is limited. Its key benefit is improved airflow and flexibility, making it easier to route in crowded racks. A potential caveat is its specific length, which may not suit all extended cable run needs. It supports up to 10 Gigabit Ethernet, 100W PoE++, and features a durable, snagless design with a Low Smoke Zero Halogen (LSZH) jacket for safety.
| Series | Cat6 |
|---|---|
| Model Part Number | N6PAT25CMBLS |
| Brand | StarTech.com |
The main advantage is its significantly reduced outer diameter (36% thinner than standard Cat6), which allows for better airflow in crowded network racks, easier routing through tight spaces, and increased cable density.
LSZH stands for Low Smoke Zero Halogen. This means the cable jacket is designed to emit very little smoke and no toxic halogens when exposed to extreme heat or fire, making it safer for use in enclosed or poorly ventilated areas.
Yes, this Cat6 cable is designed to support data transfer rates up to 10 Gigabit Ethernet (10Gbps) over limited distances, meeting Category 6 specifications.
PoE++ (Power over Ethernet Plus Plus) is a standard that allows for higher power delivery (up to 100W) over Ethernet cables. This cable complies with IEEE 802.3bt Type 4 PoE++ specifications and can reliably deliver up to 100W.
This specific cable is 0.25 meters (25 centimeters) long.
A snagless connector has a molded boot that protects the RJ45 clip. This prevents the clip from catching on other cables or surfaces during installation or removal, reducing the risk of breakage.
No, this cable features U/UTP (Unshielded Twisted Pair) construction. While it meets Cat6 standards, shielded cables (STP or FTP) offer better protection against electromagnetic interference in very high-noise environments.
Verify that both ends of the cable are securely plugged into the correct ports. Check the network adapter status on your computer and ensure the connected device is powered on and configured correctly. Try a different Ethernet cable to rule out a faulty cable.
Ensure the cable is fully seated in the ports. Confirm that your network devices (router, switch, NIC) support the desired speeds (e.g., Gigabit or 10 Gigabit). Check for any physical damage to the cable or connectors. Ensure the cable is not being used for a much longer distance than its specification allows, although 25cm is well within limits.
Confirm that the power sourcing equipment (e.g., PoE switch, injector) supports PoE++ (100W) and that the connected device does not exceed this power budget. Ensure the cable is functioning correctly for data transmission, as PoE relies on data pairs within the cable.
Inspect the cable for any signs of damage, kinks, or cuts. Ensure connectors are clean and properly inserted. If the cable is routed near sources of strong electromagnetic interference (e.g., power cables, fluorescent lights), try rerouting it. Test with another cable to confirm if the issue lies with the cable itself.
Setup: This is a plug-and-play device. Simply connect one RJ45 connector to your network device (e.g., router, switch, computer) and the other RJ45 connector to your network port or another network device. Ensure the connectors click securely into place.
Compatibility: Fully compatible with all networking equipment that utilizes RJ45 connectors and supports Cat6 or lower Ethernet standards (Cat5e, Cat5). It supports various Ethernet speeds including 10BASE-T, 100BASE-TX, 1000BASE-T, 2.5GBASE-T, 5GBASE-T, and 10GBASE-T. It is also backward compatible with older Ethernet standards.
Care: To maintain optimal performance and longevity:
