Part Washer Degreaser - 20 Gallon

Consult the manufacturer's recommendations for your part washer model and the type of parts you are cleaning. Ensure the solvent is compatible with the tank materials.

The frequency depends on usage. Change the solvent when it becomes heavily soiled or when the cleaning performance decreases. Dispose of the solvent according to local regulations.

Clean the tank and pump regularly to remove sediment. Use a suitable cleaning agent and follow the manufacturer's instructions. Always disconnect the power before cleaning.

Place the part washer in a well-ventilated area away from open flames or sparks. Ensure it is on a stable, level surface.

Always wear appropriate PPE, including gloves and eye protection. Avoid inhaling solvent fumes and ensure proper ventilation. Dispose of used solvent properly.

The Switzer 20-Gallon Part Washer is suitable for most metal parts. However, always check the solvent compatibility with the material of the parts being cleaned.

Refer to the product documentation or contact Switzer customer support for warranty information.

Check the power supply, ensure the pump is plugged in. Inspect the pump for clogs and clean as necessary. Check if the pump is primed with solvent.

Check for clogs in the pump or hoses. Ensure the solvent level is sufficient. Check the pump's filter and clean or replace it.

Check the solvent for contamination and replace if necessary. Ensure the solvent is the correct type for the parts being cleaned. Clean the parts more thoroughly.