Best current price£8.95from eBay
Shopping.co.uk recommended and popular offers
eBay£8.95Visit shop Varilight HQ1W White Plastic 1 Gang 1-Way Rotary Dimmer Switch 60-400W
Visit shopeBay£12.10Visit shop Varilight HQ1W dimmer Switch, 400 W, 240 V, White Plastic, 85x85x44mm
Visit shop
B&Q£12.79Visit shop B&Q - Hq1W Dimmer Switch400 W240 VWhite Plastic85X85X44mm
Visit shop36 offers from £8.95 - £34.52
View price history by clicking the chart icon.
This Varilight white dimmer switch is ideal for homeowners looking to control lighting ambiance and manage energy consumption. Its primary benefit is providing smooth, versatile dimming for compatible incandescent and halogen loads, though it's important to note its 1-way rotary control and 1000W maximum capacity. Key features include its 1-gang, 2-way push-on/push-off operation and a V-Dim rotary control mechanism.
| Colour | White |
|---|---|
| Model Part Number | DIMMER1G1W1000WRTARY |
| Brand | Varilight |
This dimmer is primarily designed for incandescent and halogen loads between 200W and 1000W. Use with LEDs or CFLs is only possible if they are dimmable and explicitly stated as compatible with leading-edge dimmers within this wattage range. Using incompatible bulbs may cause flickering, buzzing, or damage to the bulbs or dimmer.
A 2-way switch means this dimmer can be used in conjunction with another 2-way switch to control the same light fixture from two different locations (e.g., top and bottom of stairs).
This Varilight dimmer switch has a maximum load capacity of 1000 watts.
The minimum load for this dimmer is 200 watts. It may not function correctly with loads below this minimum.
Installation should be performed by a qualified electrician. The unit fits standard UK backboxes and requires careful wiring for its 2-way functionality.
This is a leading-edge dimmer, indicated by its V-Dim rotary control, suitable for resistive loads like incandescent and halogen lamps.
The dimensions are approximately 85mm x 85mm, designed to fit standard UK switch plates.
Ensure the load is within the 200-1000W range and that the bulbs are compatible (incandescent/halogen). Check all wiring connections are secure. If using in a 2-way setup, verify correct wiring at both switch locations.
Some warmth is normal, especially under high load. If it becomes excessively hot, turn off the power, check the load is not exceeding 1000W, and ensure adequate ventilation. Consult an electrician if concerns persist.
Verify the bulb is functional and correctly seated. Check the wiring connections. Ensure the load is within the specified minimum (200W) and maximum (1000W) limits.
Setup: This dimmer switch requires installation by a qualified electrician. It fits standard UK backboxes and is designed for 2-way wiring, meaning it requires a two-way switch at the other location to function correctly. Ensure the power is isolated before attempting any installation.
Compatibility: This dimmer is designed for use with 200-1000W incandescent and halogen loads. It is *not* suitable for low-energy bulbs like CFLs or most LEDs unless they are specifically dimmable and compatible with leading-edge dimmers and the switch's wattage range. Always check bulb manufacturer specifications.
Care: To clean, switch off the power supply and wipe the switch plate with a slightly damp, soft cloth. Avoid using abrasive cleaners or solvents, as these can damage the finish.
