Notebook or Display Arm - Lindy - 40982

The arm can accommodate notebooks or panels up to 17.3 inches (43.9 cm) diagonally. For VESA-mounted displays, compatibility depends on the VESA pattern (75x75mm or 100x100mm) and the display's weight (up to 10kg).

This arm is designed for either a laptop OR a display. To use both, you would typically need a separate mount for the second device or a dual-arm setup.

The arm offers a height adjustment range of 200mm to 340mm, allowing for significant vertical positioning flexibility.

The packaging includes a laptop plate, a VESA display plate, various screws for assembly and VESA mounting, and other necessary components. Refer to the packaging content list for specifics.

Clean the arm with a soft, dry or slightly damp cloth. Avoid using harsh chemicals or abrasive materials that could damage the metal finish.

The Lindy Laptop/Notebook Display Arm comes with a 2-year warranty.

While the arm supports VESA mounting, compatibility with curved monitors depends on the monitor's weight and specific VESA mounting points. The tilt angle range should also be considered.

Check the tension screws on the arm's joints. Tighten them to increase resistance or loosen slightly if too stiff. Ensure the weight of the mounted device is within the 10kg limit.

Verify that your monitor supports either 75x75mm or 100x100mm VESA mounting patterns. Ensure you are using the correct screws provided for the VESA mount.

Ensure the notebook is centered on the plate and that any included securing mechanisms or lip on the plate are utilized correctly. Check if the plate is installed at a suitable angle; adjust tilt if necessary.

Re-check that the desk clamp is tightened securely onto the desk edge. Ensure the desk surface and edge are suitable for clamping and do not interfere with a firm grip.