A 6kA Wylex Miniature Circuit Breaker (MCB) with a single pole (SP) configuration, rated at 16 Amp...A 6kA Wylex Miniature Circuit Breaker (MCB) with a single pole (SP) configuration, rated at 16 Amps and featuring a Type B trip curve. This MCB is part of the NHX series and has the manufacturer part number NHXB16.
Wylex MCB 16 Amp Single Pole Circuit Breaker Type B 16A NHX NHXB16Free delivery in 1–3 days£4.95Visit shop →
Wylex MCB 16 Amp Single Pole Circuit Breaker Type B 16A NHX NHXB16£2.94 delivery£5.45Visit shop →
Wylex MCB 16 Amp Single Pole Circuit Breaker Type B 16A NHX NHXB16Free delivery in 1–3 days£5.99Visit shop →
Wylex MCB 16 Amp Single Pole Circuit Breaker Type B 16A NHX NHXB16Free delivery in 1–3 days£5.99Visit shop →
2 X Wylex MCB 6 Amp Single Pole Circuit Breaker Type B 6a Nhxb06Free delivery in 1–3 days£9.58Visit shop →
2 X Wylex MCB 6 Amp Single Pole Circuit Breaker Type B 6a Nhxb06Free delivery in 1–3 days£9.58Visit shop →
Joblot 8 X Wylex NHXB16 B16 MCB 16A Type B 230V 6kA Circuit BreakersFree delivery in 1–3 days£25.00Visit shop →
Product Information
Full details
This guide is for electricians and qualified personnel working with electrical systems. It details the Wylex NHXB16 Miniature Circuit Breaker (MCB), a single-pole, 16 Amp, Type B device. The key benefit is reliable circuit protection, but proper installation and adherence to safety regulations are critical for effective use.
All features
Series
NHX
Model Part Number
NHXB16
Brand
Wylex
Extended Product Information
FAQs
What is the meaning of 16A?
16A refers to the maximum current the MCB is designed to carry continuously without tripping.
What does Type B mean?
Type B indicates the trip curve, specifying how quickly the MCB trips in response to overcurrents. Type B MCBs are typically used for domestic and light commercial applications.
Where should I install the MCB?
The MCB should be installed in a distribution board or consumer unit, protecting the individual circuits.
Can I use this MCB for a three-phase circuit?
No, this is a single-pole MCB and is not suitable for three-phase applications.
What is the breaking capacity?
The breaking capacity (6kA in this case) indicates the maximum fault current the MCB can safely interrupt.
How often should I test the MCB?
It's recommended to test MCBs periodically, following local regulations and guidelines.
Who should install the MCB?
Installation should only be performed by a qualified electrician to ensure safety and compliance with regulations.
Troubleshooting
MCB trips frequently.
Check for overloaded circuits, short circuits, or faulty appliances. Replace the MCB if it continues to trip with normal load.
MCB fails to trip during a fault.
Immediately replace the MCB. Contact a qualified electrician to inspect the circuit and wiring.
Difficulty in resetting the MCB.
Ensure the fault has been cleared. If the MCB still won't reset, it may be faulty and require replacement.
Pros and Cons
Pros
Reliable overcurrent protection for electrical circuits.
Quick tripping response for enhanced safety.
Suitable for a wide range of applications.
Easy to install and integrate into existing electrical panels.
Complies with relevant safety standards.
Cons
Requires professional installation by a qualified electrician.
Specific to single-pole circuits; not suitable for three-phase applications.
Limited to a 16 Amp current rating.
Requires careful consideration of circuit load to prevent nuisance tripping.
May require replacement if repeatedly subjected to overload conditions.
Setup, Compatibility & Care
Setup:
Installation must be performed by a qualified electrician.
Ensure the electrical panel is de-energized before installation.
Refer to the manufacturer's instructions for detailed wiring diagrams.
Connect the line and load conductors to the appropriate terminals.
Tighten all connections securely.
Compatibility:
Compatible with standard DIN rail mounting systems.
Suitable for use in domestic and light commercial installations.
Verify compatibility with the specific electrical panel and system voltage.
Care:
Regularly inspect the MCB for any signs of damage or wear.
Test the MCB periodically to ensure proper functionality.
Do not attempt to repair the MCB; replace it if it malfunctions.