Best current price£26.65from OnBuy.com
Shopping.co.uk recommended and popular offers
OnBuy.com£26.65Visit shop Iroda Solderpro 100 30-100W Gas Soldering Iron 742286981009
Visit shop
Amazon£26.99Visit shop Iroda Pro-100 Solderpro Soldering Iron
Visit shop2 offers from £26.65 - £26.99
View price history by clicking the chart icon.
The Iroda SolderPro 100 is a professional-grade, portable butane-powered soldering iron for DIY enthusiasts and technicians needing on-the-go soldering capabilities. Its key benefit is the cordless freedom and variable heat control, offering a power range equivalent to 30W-100W with a maximum temperature of 500°C. A potential caveat is the need for butane fuel, which requires careful handling and refilling.
| Model Part Number | PRO-100 |
|---|---|
| Brand | Iroda |
Use high-quality, purified butane fuel specifically designed for refillable torches and lighters. Avoid generic or impure fuels, which can clog the iron.
The fuel tank provides up to 120 minutes of operation at a mid-range setting. Actual run time will vary based on the heat setting used.
Yes, the variable heat control allows for precise temperature adjustment, making it suitable for detailed electronics work. However, always use the lowest effective heat setting for sensitive components.
The product description does not specify a protective cap. It is recommended to allow the iron to cool completely before storing in a suitable protective case.
Ensure the iron is completely cool. The tip is typically secured by a retaining nut. Unscrew the nut, carefully remove the old tip, insert the new tip, and retighten the nut. Refer to the product manual for specific instructions.
The Iroda SolderPro 100 has a variable heat control equivalent to a power range of 30W to 100W.
The self-igniting feature and portability make it suitable for outdoor use, but always exercise caution and be aware of wind conditions that could affect the flame.
Ensure the fuel tank is filled. Check if the ignition switch is fully engaged. Make sure no obstructions are blocking the ignition mechanism. If the problem persists, the igniter may need service.
Refill the butane tank. Ensure the fuel is not contaminated. Clean the tip and nozzle area for any carbon buildup.
Verify the power adjustment dial is set to a higher setting. Check that the flame is present and stable. Ensure the tip is clean and properly seated.
Immediately stop use and allow the iron to cool in a well-ventilated area away from ignition sources. Check all seals and connections. Do not use if leaks persist.
Setup:
Compatibility:
Care:
