Securit Mending Plate - Silver
Not Available
Not Available
Zinc plated mending plate. 150mm (5.9in) with 4 holes.
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
This guide is for DIY enthusiasts and tradespeople needing to reinforce or repair joints in wood or other materials. The Securit Mending Plate offers a durable, corrosion-resistant solution for structural integrity. A potential consideration is its specific size and hole configuration, which may require precise alignment for optimal application.
All features
| Colour | Silver |
|---|---|
| Brand | B&Q |
Extended Product Information
FAQs
What size screws should I use?
The plate has four holes suitable for standard wood screws. The ideal screw length depends on the thickness of the materials you are joining, ensuring it penetrates adequately without going too far through. A #8 or #10 gauge screw is commonly suitable.
Is this plate suitable for load-bearing walls?
This mending plate is designed for reinforcing joints in wood and similar materials. For structural load-bearing applications in walls, consult with a qualified builder or engineer as specialized hardware may be required.
Can I paint or finish the mending plate?
While the plate is designed to be functional, you can paint or coat it if desired. Ensure the surface is clean and dry, and use a primer suitable for metal before applying paint for best adhesion.
How many holes does the plate have?
The Securit Mending Plate has four pre-drilled holes.
What material is the plate made from?
The plate is made from metal with a zinc-plated finish.
Can this be used for metal-to-metal connections?
While primarily intended for wood, it could be used with appropriate metal screws or bolts for connecting thin metal sheets, but specialized metal joining techniques are usually preferred for structural metal connections.
Troubleshooting
Plate does not sit flush
Ensure the surface of the material is flat. Check for any debris preventing a flush fit. If joining uneven surfaces, consider using washers.
Screws do not grip firmly
Ensure you are using screws of the correct length and diameter for the material. If the material is soft, consider pre-drilling pilot holes or using screws with a wider thread.
Plate appears to be rusting
Zinc plating offers resistance, but is not impervious. Ensure the plate is not constantly exposed to harsh chemicals or extremely corrosive environments. Clean the plate and check for deep scratches that may have compromised the plating.
Pros and Cons
Pros
- Enhances structural integrity of joints.
- Zinc plating offers good rust and corrosion resistance.
- Easy to install with standard screws.
- Provides a clean, finished look to repairs.
Cons
- Size (150mm) may not be suitable for very small or very large joints.
- Requires appropriate fasteners (screws/bolts) not included.
- Silver color may not match all wood finishes.
- Designed for specific load-bearing applications; not a decorative item.
Setup, Compatibility & Care
Setup:
- Position the mending plate across the joint or weak point you wish to reinforce.
- Ensure the plate is aligned straight and the holes are centered over the areas to be joined.
- Mark the screw hole locations on the material if needed.
- Secure the plate using appropriately sized wood screws or bolts that are suitable for the material being joined. Use all four holes for maximum stability.
Compatibility:
This mending plate is primarily designed for use with wood. It can also be used with other rigid materials like some plastics or composite boards, provided suitable fasteners are used. Ensure fasteners are compatible with both the plate's material and the material being joined.
Care:
While the zinc plating offers corrosion resistance, regular cleaning can prolong its appearance and function. Wipe down with a damp cloth to remove dust and debris. Avoid abrasive cleaners that could scratch the surface. For outdoor applications, occasional inspection for any signs of significant corrosion is recommended.