Rawlplug Wash Basin Fixing Kit - White

This kit is suitable for solid walls, including concrete, brick, block, and stone.

You will need a drill, the appropriate drill bit for your wall material, and a screwdriver or wrench.

The cover caps simply snap or clip onto the fixings after the basin is mounted.

This kit is not recommended for hollow or plasterboard walls. You may need a different type of fixing for these materials. Consult a professional.

Use a damp cloth to wipe the cover caps. Avoid using abrasive cleaners that could damage the finish.

The kit is compatible with most washbasins. However, it's best to check the basin's mounting specifications.

The anti-rotation fins prevent the fixing from spinning during screw tightening, making installation easier and more secure.

Check if the fixings are properly tightened. Ensure the wall material is solid and the correct fixings were used. If the issue persists, consider using larger fixings or consulting a professional.

Ensure the fixings are flush with the surface. If necessary, adjust the position of the fixings slightly. Make sure you are using the correct cover caps provided in the kit.