A2 Adhesive Spreader - 18cm - V Notch

It is ideal for LVT, Vinyl, Karndean, and Amtico flooring, especially when using pressure-sensitive adhesives.

The V-notch design ensures a consistent and uniform application of pressure-sensitive adhesives, creating ridges that collapse evenly under pressure for optimal bonding.

Clean the blade immediately after use with a damp cloth. For dried adhesive, use a mild solvent and rinse thoroughly. Ensure it's dry before storing.

This spreader is specifically optimized for pressure-sensitive adhesives. For other adhesive types (e.g., tile adhesive), a different trowel might be more appropriate.

The blade is 18cm wide. The overall dimensions are approximately 180mm x 120mm x 20mm.

The spreader weighs approximately 0.22 pounds (around 0.1 kg).

While suitable for professional use, the 18cm width is best for smaller to medium-sized areas or detailed work. For very large projects, you might consider multiple spreaders or a wider model if available.

Ensure the spreader is held at a consistent angle (typically 45-60 degrees) relative to the surface. Check for debris on the V-notch. Clean the blade thoroughly.

Clean the spreader immediately after use. If adhesive has dried, use a suitable solvent and a brush to remove it. Ensure the adhesive is within its pot life as per manufacturer instructions.

Ensure you are holding the spreader with the ergonomic handle. Take breaks during prolonged use to prevent fatigue.