Best current price£34.75from eBay
Shopping.co.uk recommended and popular offers
eBay£34.75Visit shop Deta BV1081 Garage Consumer Unit 2 Way with 63A RCD + 1 x 32A + 1 x 6A MCB IP40
Visit shop
B&Q£39.20Visit shop B&Q - Bv1081 Garage Consumer Unit 2 Way With 63A Rcd + 1 X 32A + 1 X 6A Mcb (Ip40)
Visit shop7 offers from £34.75 - £156.00
View price history by clicking the chart icon.
The Deta BV1081 is a 2-way garage consumer unit designed for surface mounting, offering a compact and robust solution for electrical distribution in garages or similar utility spaces. Its key benefit lies in providing essential circuit protection with a 63A RCD and integrated MCBs. A potential consideration is its IP40 rating, suitable for indoor dry environments but not for areas exposed to significant moisture or dust.
| Model Part Number | BV1081 |
|---|---|
| Brand | Deta |
The Deta BV1081 has an IP40 rating, which means it is protected against solid objects larger than 1mm and offers no protection against water.
No, electrical installations, including consumer units, must be carried out by a qualified electrician to ensure safety and compliance with regulations.
The unit is populated with a 32A and a 6A MCB and includes a 63A RCD. It is designed for standard modular circuit protection devices conforming to relevant safety standards.
No, due to its IP40 rating, it is designed for indoor use in dry environments only and should not be exposed to moisture or weather.
The Deta BV1081 is a 2-way consumer unit, meaning it has two outgoing ways to connect circuits.
The unit comes with a 63A RCD, providing residual current protection for the connected circuits.
This may indicate an earth fault in one of the connected circuits. Disconnect all outgoing circuits and reset the RCD. If it still trips, the RCD itself may be faulty. If it stays on, reconnect circuits one by one to identify the faulty circuit. Consult a qualified electrician.
This usually signifies a short circuit on the connected load. Ensure no appliances are switched on. If the problem persists, there might be a wiring fault or a faulty appliance. Disconnect all loads and test wiring. Consult a qualified electrician.
Do not operate the unit. De-energize the supply immediately and arrange for a qualified electrician to inspect and replace the unit if necessary.
Setup:
Installation of the Deta BV1081 consumer unit should only be performed by a qualified electrician, adhering to all relevant electrical safety standards and building regulations. The unit is designed for surface mounting, allowing it to be fixed directly to a wall or suitable mounting board.
Compatibility:
This consumer unit is designed to accept standard MCBs and RCDs that comply with relevant industry standards. It is typically used as a sub-distribution board fed from a main consumer unit.
Care:
To maintain the unit's performance and safety:
