Marksman Hacksaw Frame With Mitre Box - Carpenter Woodwork Workshop Cutting Diy

The Marksman Hacksaw Frame is designed to work with standard hacksaw blades.

Loosen the screw tensioner, remove the old blade, insert the new blade, and then tighten the tensioner.

While the frame can technically be used to cut through thin, softer metals, it is primarily designed for use with wood, plastic and similar materials. Using an appropriate blade will increase its ability.

The blade can be set at 6 different cutting angles. Simply adjust the frame to the desired angle before tightening the blade.

The mitre box is used to guide the saw blade at a specific angle, allowing for precise angled cuts, which is especially useful for making picture frames or other angled joints.

Store the hacksaw frame in a dry place to prevent rust and damage. Consider hanging it on a pegboard or storing it in a toolbox.

Wipe the frame clean after each use, check the blade for sharpness and consider applying a light lubricant to the tensioner screw.

Tighten the blade tensioner screw to ensure the blade is secure.

Check the blade for dullness or damage. Replace with a new blade if necessary.

Ensure the material is correctly aligned with the guides in the mitre box. Check for any obstructions or debris in the guides.