Sony CFexpress Type B / XQD Memory Card Reader - MRWG1

The MRW-G1 supports CFexpress Type B and Sony XQD G series and M series memory cards.

The card reader uses a USB 3.2 Gen 1 (3.1 Gen 1) Type-C interface.

The card reader comes with both a USB Type-C to USB Type-C cable and a USB Type-C to USB Type-A cable.

No, the card reader is plug-and-play and does not require any additional drivers.

Connecting to a USB Type-C port that supports Thunderbolt 3 or USB 3.1 Gen 2 enables much faster data transfer speeds, allowing you to offload your files more quickly.

Yes, the card reader supports hot-swapping, allowing you to remove and insert cards without turning off the device.

Yes, the MRW-G1 has a compact design, making it easy to carry around.

Use a soft, dry cloth to clean the exterior of the card reader. Avoid using liquids or abrasive cleaners.

Ensure the card reader is properly connected to the computer. Try a different USB port or a different cable. Check that the memory card is correctly inserted. If the problem persists, try restarting your computer.

Ensure you are using a USB 3.1 Gen 2 or Thunderbolt 3 port on your computer. Check the speed rating of your memory card; slower cards will result in slower transfer speeds. Close any other applications that might be using system resources during the transfer.

Safely eject the memory card from your computer's operating system before physically removing it from the card reader. If the card is still stuck, gently try removing it.