Cablenet Cat6a Patch Lead - 10m - Red

Cat6a (Category 6a) supports higher frequencies (up to 500 MHz) and is designed for 10 Gigabit Ethernet at longer distances (up to 100 meters) compared to Cat6 (up to 250 MHz, typically 10 Gbps up to 55 meters). Cat6a also generally offers better crosstalk reduction.

S/FTP stands for Screened/Foiled Twisted Pair. It means each pair of wires inside the cable is individually shielded with foil, and the entire bundle of pairs is also covered by a braided screen. This provides superior protection against electromagnetic interference (EMI) and crosstalk.

Yes, this Cablenet Cat6a patch lead supports Power over Ethernet (PoE) and specifically PoE++ (4PPoE), allowing it to carry both data and power to compatible devices.

LSOH stands for Low Smoke Zero Halogen. Cables with this jacket material emit minimal smoke and no toxic halogen gases when exposed to fire, which is a significant safety advantage in enclosed spaces like data centers or public areas.

No, this specific cable is designed for indoor use. It is not rated for outdoor environments, which typically require weather-resistant jacketing.

You should hear a distinct 'click' when you firmly insert the RJ45 connector into a port, indicating it is securely latched. Network devices should also indicate an active link status (e.g., an LED light on the port).

While technically possible, cutting and re-terminating shielded Cat6a cable requires specialized tools and knowledge to maintain its performance and shielding integrity. It is generally recommended to purchase the cable in the desired length.

Verify that both ends of the cable are securely seated in their respective ports. Check that the network ports on both devices are active and enabled. Try a different known working cable to rule out a cable fault.

Ensure the cable is not damaged (kinked, cut, or heavily worn). Check that the network devices support speeds higher than the current performance. Ensure the cable length (10m) is appropriate and not exceeding optimal distances for the desired speed if other factors are limiting.

Inspect the RJ45 connector and the locking tab for damage. The snagless boot should not impede the tab. If the tab is broken, the connector may not latch properly and may require replacement.