Best current price£7.15from OnBuy.com
Shopping.co.uk recommended and popular offers
OnBuy.com£7.15Visit shop Forgefix Self-Tapping Screws, Pozi, Pan Head, Zp
Visit shop
B&Q£7.47Visit shop - Forgefix Self-Tapping ScrewsPoziPan HeadZp Multi Colour (5/8 X 6)
Visit shop3 offers from £7.15 - £7.47
View price history by clicking the chart icon.
Designed for professionals and DIY enthusiasts alike, these Forgefix Pozidriv Self-Tapping Screws are essential fasteners for metal-to-metal or metal-to-plastic assemblies. They offer superior holding power and corrosion resistance due to their zinc-plated finish and single-thread design. While they are highly versatile for engineering and electrical applications, users must ensure they use the correct pilot hole size to prevent material stripping or screw snapping during installation.
| Colour | Multicolor |
|---|---|
| Brand | Forgefix |
Yes, although they are self-tapping, a pre-drilled pilot hole is necessary to ensure the screw taps correctly into sheet metal without damaging the material.
The zinc plating provides good indoor and limited outdoor protection, but they should not be used in marine or highly corrosive environments.
Pozidriv heads have additional radial lines and are designed to allow higher torque application without cam-out compared to standard Phillips screws.
These are specifically designed for sheet metal and similar dense materials; they are not optimized for structural wood applications.
For pan head screws, you should measure from the base of the head to the tip of the screw.
Ensure you are using the correct size Pozidriv bit and applying sufficient downward pressure to prevent cam-out.
Verify that your pilot hole is the correct diameter; if the hole is too small, the screw will struggle to cut threads.
Reduce the torque setting on your drill and ensure the hole is correctly chamfered if necessary.
To achieve the best results, always measure the thickness of your material before selecting screw length. Use a power drill with a depth stop or a manual screwdriver to avoid overtightening. To ensure longevity, keep the screws stored in a dry, low-humidity environment to preserve the integrity of the zinc coating. When installing, use steady pressure to help the screw start its own thread in the pre-drilled pilot hole. Avoid using impact drivers on smaller gauge screws to prevent snapping the head off the shaft.
