Command Hanging Hooks - White

The specific weight limit can vary depending on the Command™ hook model and the size of the adhesive strips. Always refer to the product packaging for the exact weight capacity. These designer hooks are generally intended for small, lightweight items.

Proper preparation is key. Clean the surface with isopropyl rubbing alcohol, let it dry completely, and apply the adhesive strip firmly for 30 seconds. Wait at least one hour before hanging an item.

No, Command™ strips are designed for single use. Once removed, they lose their adhesive properties and must be replaced with new strips for reapplication.

Avoid using on wallpaper, textured walls, vinyl, or other delicate surfaces where removal might cause damage. They are best on smooth, painted walls, finished wood, tile, glass, and metal.

Hold the hook firmly and gently pull the tab straight down along the wall, slowly and steadily. Never pull the hook or tab away from the wall at an angle.

This pack typically includes 2 hooks and 4 adhesive strips, allowing for multiple applications or hanging two items.

It is recommended to wait at least one hour after applying the hook before hanging an item to allow the adhesive to bond securely to the surface.

Ensure the wall surface was cleaned thoroughly with isopropyl rubbing alcohol and allowed to dry completely before application. Avoid touching the adhesive strips. Ensure the surface is not heavily textured or wallpapered.

When removing, hold the hook and pull the tab *straight down* along the wall slowly and steadily. Do not pull the hook away from the wall at an angle.

Verify that the item being hung does not exceed the weight limit specified for the particular Command™ hook. Reapply the hook following the setup instructions precisely.

Command™ hooks are not designed for wallpaper or delicate painted surfaces that may peel. Removal may cause damage. For best results, use on smooth, painted walls, tile, or finished wood.