SecureFix Direct Stainless Steel Wire Rope Cable 10mm 1X19 - Silver

The 1x19 construction offers very high tensile strength and is the least flexible of common wire rope constructions. This makes it ideal for static applications where minimal stretch and high load-bearing capacity are critical, such as standing rigging or architectural supports.

No, the 1x19 construction is very stiff and has very low flexibility. It is not suitable for applications that involve frequent bending, coiling, or dynamic movement, as it can kink easily and lose strength.

You should measure the required run for your application and add extra length for terminations (e.g., loops, splices). It's often recommended to add at least 1-2 meters to your final measurement to account for wastage and the securement process.

316 grade stainless steel is a high-quality alloy known for its superior corrosion resistance, especially against chlorides (like salt water) and acids. This makes it an excellent choice for marine, coastal, or industrial environments where exposure to harsh elements is expected.

Yes, you can use standard wire rope clips, but it is highly recommended to use them with a thimble to protect the eye of the loop from wear and deformation. Ensure the clips and thimble are the correct size for 10mm wire rope and are installed according to best practices.

The breaking load for this 10mm 1x19 stainless steel wire rope cable is 8400KG.

Store the wire rope loosely coiled in a clean, dry environment, away from direct sunlight and extreme temperatures. Avoid kinking the rope during storage.

Inspect the entire length carefully. A kink can permanently weaken the rope. If significant damage is present, the section should be replaced. Avoid bending the rope sharply during handling and installation.

Ensure you are using appropriate heavy-duty cutting tools specifically designed for steel wire rope of this diameter and construction. Standard wire cutters will not be sufficient.

Verify that the correct type and size of termination hardware (e.g., clips, sleeves) are being used for 10mm 1x19 wire rope. Ensure hardware is installed correctly and tightened to the manufacturer's specifications. Consider using a thimble to protect the eye of the loop.

While 316 stainless steel offers excellent resistance, it is not entirely immune to corrosion, especially in harsh marine environments. Clean the affected area with a soft brush and mild soap, rinse with fresh water, and dry thoroughly. If corrosion is deep or compromising the rope's integrity, replacement may be necessary.