Lick White Multi-Surface Non-Magnetic Primer & Undercoat, 2.5L - White

Lick Multi-Surface Primer & Undercoat is suitable for use on wood, metal, and masonry surfaces, both interior and exterior.

One or two coats are typically sufficient, depending on the surface and the topcoat color. Two coats are recommended for optimal results.

Allow the primer to dry completely before applying the topcoat. Drying times vary, but typically range from 2-4 hours.

While the primer is compatible with a wide range of paints, including other brands, it is recommended to use it with Lick paints for the best results.

Clean brushes, rollers, and other equipment with warm, soapy water immediately after use.

Yes, this primer is suitable for both interior and exterior applications.

Coverage varies depending on the surface and application method. Typically, 1L covers approximately 10-12 square meters.

Ensure the surface is properly prepared by cleaning and sanding. Also, check for any contaminants that may be preventing adhesion.

Ensure you are using the correct application technique. Use a high-quality brush or roller. Apply thin, even coats, and avoid overworking the primer.

Make sure the primer is compatible with the surface and topcoat. If peeling persists, remove the primer, re-prepare the surface, and reapply.