Primaplus compression fittings are a premium brass fitting, manufactured in Britain. Primaplus com...Primaplus compression fittings are a premium brass fitting, manufactured in Britain. Primaplus compression fittings can be used for a variety of installations including water and gas. Made in Britain to EN 1254 standard, and fully WRAS approved, you can be sure of a perfect fit each time. PrimaPlus fittings are also kite marked, ensuring that they are to the highest British standard, setting them apart from others manufacturers. Kite marked approval BS Standard. WRAS approved for use with drinking water. Manufactured to EN 1254 standard. This pack contains 10 discs.
This Prima Plus 22mm Compression Blanking Disc is for plumbers and DIY enthusiasts working on water and gas installations requiring a secure end cap. Its key benefit is ensuring a reliable seal that meets stringent British and European standards. A potential caveat is that it is designed specifically for compression fittings and may not be suitable for other pipe joining methods.
All features
Model Part Number
21080525
Brand
Prima Plus
Extended Product Information
FAQs
What material is the Prima Plus blanking disc made from?
The disc is made from premium brass, manufactured in Britain.
Is this disc suitable for drinking water?
Yes, it is WRAS approved, making it safe for use with drinking water systems.
What standards does this product meet?
It meets EN 1254 standard and is BS Kite Marked.
Can I use this with any brand of compression fitting?
It is specifically designed for Prima Plus compression fittings for guaranteed performance. Compatibility with other brands is not assured.
What pipe size is this blanking disc for?
This disc is for 22mm pipes.
What is the purpose of a blanking disc?
A blanking disc is used to securely cap off the end of a pipe in a compression fitting system, preventing flow.
How many discs are included in this pack?
This pack contains 10 discs.
Troubleshooting
Leak detected after installation.
Ensure the compression nut was tightened sufficiently. Check that the pipe was cut square and the disc was fully inserted. Verify the correct size olive was used and that the pipe is free from damage. If the issue persists, the fitting may need to be disassembled and reassembled, or the disc/olive replaced.
Difficulty fitting the disc onto the pipe.
Confirm you are using a 22mm pipe and disc. Ensure the pipe end is not deformed or damaged. Gently clean the inside of the pipe end if necessary.
Fitting does not seal properly.
Double-check that you are using genuine Prima Plus compression fittings and olives for optimal compatibility. Ensure all components are clean and correctly aligned before tightening.
Pros and Cons
Pros
High-quality British manufacturing ensures reliability.
WRAS approval means it's safe for potable water systems.
Meets both European (EN 1254) and British (BS Kite Mark) standards.
Durable brass construction offers excellent longevity.
Ideal for both water and gas installations where secure capping is needed.
Cons
Primarily designed for Prima Plus compression fittings, may not be compatible with other brands or types.
Only suitable for 22mm pipe sizes.
Requires appropriate compression tools for installation, not a universal fitting.
Setup, Compatibility & Care Instructions
Setup:
Ensure the pipe end is clean, free from debris, and cut square.
Slide a compression nut and then a compression olive onto the pipe.
Insert the Prima Plus 22mm Compression Blanking Disc fully into the end of the pipe.
Position the olive over the end of the disc and pipe.
Slide the compression nut up to the fitting body and tighten it securely onto the fitting, compressing the olive to create a seal.
Compatibility:
This blanking disc is specifically designed for use with Prima Plus compression fittings and 22mm copper or compatible plastic pipe.
It is intended for use in water and gas installations that conform to relevant British and European standards.
Care:
These discs require no specific maintenance once installed.
Ensure the surrounding compression fitting is checked periodically for any signs of leakage, as per standard plumbing best practices.