Smart Metal Buster Blade - 35mm

The Smart Metal Buster Blade can cut stainless steel, ferrous metals, hardened screws, nails, bolts, and abrasive materials like fibreglass.

This blade has a universal fit and is compatible with most major multi-tool brands, except for the Starlock range for Fein Multimasters. Refer to your multi-tool's manual for specific compatibility information.

The blade's lifespan depends on the materials being cut and the frequency of use. With proper care and use, it can last for a considerable amount of time. Inspect regularly for wear and tear and replace when necessary.

Follow your multi-tool's manufacturer's instructions for blade replacement. Ensure the tool is turned off and the battery is removed before installation. Make sure the blade is securely fastened.

After each use, clean the blade with a wire brush or cloth to remove metal shavings and debris.

Always wear safety glasses when using the blade. Use appropriate gloves and other safety equipment as needed. Ensure the material being cut is securely fastened.

The blade has a width of 35mm and a length of 46mm (or 40mm in some descriptions).

Warranty information is not available in the provided product details.

Check if the blade is properly installed and securely fastened. Ensure you are using the correct speed and pressure for the material. The blade may also need to be replaced if it's dull.

Reduce the cutting speed and apply less pressure. Allow the blade to cool down periodically. Make sure the material is properly secured to avoid friction.

Ensure the blade is correctly mounted and that the multi-tool is in good working order. Check for any obstructions or material buildup.