Performance Power Spring Clamp - 85mm

The clamp has a maximum opening size suitable for materials up to 85mm in width.

While the clamp has a corrosion-resistant finish, prolonged exposure to harsh weather conditions is not recommended. It is best used in a dry environment.

The jaws are designed for a firm grip. For very soft woods or delicate surfaces, it is advisable to place a thin piece of scrap material or cloth between the clamp jaws and the workpiece to prevent marring.

The clamping force is generated by the spring mechanism and is designed to be sufficient for most DIY tasks. Specific force measurements are not provided, but they offer a strong hold for general use.

They can be used for holding thin metal sheets or small metal components securely during assembly or finishing tasks.

This clamp is suitable for wood, plastics, fabric, foam, and thin sheet metal, among other materials.

Wipe clean with a damp cloth. Avoid harsh chemicals or abrasive cleaners. Ensure the clamp is dry before storing.

Ensure the material thickness is within the clamp's capacity and that the jaws are fully engaged. Check for any debris on the jaws that might be interfering with the grip.

Wipe down the spring and jaw pivot points with a clean cloth. A tiny drop of lubricant (like WD-40) can be applied to the pivot if necessary, but ensure it does not transfer to your work material.

Ensure you are gripping the handles correctly. For prolonged use, consider wearing gloves. If the stiffness is excessive, check for obstructions in the spring mechanism.