Shopping.co.uk

Draper Scroll Saw - 90W

Draper Scroll Saw - 90W

Effortless cutting is yours with the Draper Scroll Saw, featuring a flexible drive shaft and workl...

Best current price£133.15from Power Tools Direct

Best offers

Shopping.co.uk recommended and popular offers

Lowest priceMost popular
Power Tools Direct£133.15Visit shop

Draper Light 22791 Variable Speed Scroll Saw With Flexible Drive Shaft And Work 405Mm 90W Each

Visit shop

All Offers

16 offers from £133.15 - £239.99

View price history by clicking the chart icon.

Power Tools DirectDraper Light 22791 Variable Speed Scroll Saw With Flexible Drive Shaft And Work 405Mm 90W Each
£9.95 delivery
£133.15
Visit shop
Rapid Online - Rapid Electronics Ltd.Draper 22791 405mm Variable Speed Fretsaw - Flexible Drive Shaft &...
Free delivery in 1–3 days
£137.17
Visit shop
eBayDraper 1x 405mm 90W 230V Variable Speed Fretsaw Flexible Drive Shaft & Worklight
Free delivery in 1–3 days
£139.19
Visit shop
Tooled UpDraper Light Fs405v Variable Speed Fretsaw
£10.95 delivery
£139.95
Visit shop
Robert DyasDraper 400mm 230V Scroll Saw - Aluminium Table - 0-45 Degree Tilt - Dust Blower
£2.95 delivery
£139.99
Visit shop

Used Offers

2 offers from £149.95

View price history by clicking the chart icon.

eBayScroll Saw Variable Speed Flexible Drive Shaft Worklight 405mm 90W Draper 22791
Free delivery in 1–3 days
£149.95
Visit shop

Product Information

Full details

This guide is for anyone using the Draper Scroll Saw - 90W to cut a variety of materials with precision and ease. Its key benefit is the effortless cutting experience, thanks to its flexible drive shaft and worklight. A possible caveat is that you'll need to purchase a blade clamp holder if you intend to use pinless fret saw blades.

All features

Model Part Number22791
BrandDraper

Extended Product Information

FAQs

What type of blades does the saw use?

The Draper Scroll Saw uses 127mm pin end blades and pinless fret saw blades. Pinless blades require a separate blade clamp holder.

How do I change the blade?

Refer to the user manual for detailed instructions. Generally, you'll loosen the blade clamps, remove the old blade, insert the new blade, and tighten the clamps.

Can I cut metal with this saw?

Yes, you can cut thin sheets of metal, but make sure to use the appropriate blade for metal cutting.

How do I adjust the table angle?

Loosen the locking mechanism on the table, tilt the table to the desired angle (0-45 degrees), and then tighten the locking mechanism.

How do I connect a vacuum to the saw?

The saw has a dust extraction port. Connect a vacuum hose to this port to remove dust and debris during cutting.

What safety precautions should I take?

Always wear safety glasses. Use the correct blade for the material. Secure the material properly. Do not force the saw. Keep hands away from the blade.

How do I clean the saw?

After use, disconnect the saw from the power supply. Use a brush or vacuum cleaner to remove sawdust and debris. Wipe down the table and housing with a damp cloth.

What is the warranty?

The product includes a cable and approved plug.

Troubleshooting

The saw does not turn on.

Check the power cord and outlet. Ensure the power switch is in the 'on' position. Check the fuse.

The blade breaks frequently.

Ensure the blade is installed correctly and tightened properly. Adjust the blade tension if necessary. Use the correct blade type for the material being cut. Reduce the feed rate.

The cuts are not straight.

Check the blade alignment and adjust if needed. Ensure the material is properly supported on the table. Reduce the feed rate.

Excessive vibration.

Check that the saw is placed on a stable surface. Check the blade and replace if necessary.

Pros and Cons

Pros

  • Flexible drive shaft for enhanced cutting precision.
  • Integrated worklight improves visibility in low-light conditions.
  • Dust blower and extraction port keep the work area clean.
  • Tilting table provides versatile cutting angles.
  • Compatible with a wide range of blades (with adapter).

Cons

  • Requires a blade clamp holder for pinless blades (sold separately).
  • Assembly may be required upon initial setup.
  • The 90W motor may be underpowered for very thick materials or extended use.

Setup, Compatibility & Care

  1. Setup:
  • Carefully unpack the scroll saw and inspect for any damage.
  • Attach the aluminum table securely to the base.
  • Install the blade according to the manufacturer's instructions. Note: Pinless blades require a blade clamp holder.
  • Connect the dust extraction system (optional).
  • Plug in the saw and test its operation.
  1. Compatibility:
  • Compatible with standard 127mm pin end blades and pinless fret saw blades (requires separate blade clamp holder).
  • Ensure the saw is connected to a power outlet with the correct voltage.
  1. Care:
  • Keep the saw clean by removing dust and debris after each use.
  • Regularly inspect the blade for wear and replace as needed.
  • Lubricate moving parts according to the manufacturer's instructions.
  • Store the saw in a dry location.

Price History

DatePrice
Visit shop