Rustins Driveway & Oil Cleaner - 4L

You can use Rustins Driveway & Oil Cleaner on masonry, brick, concrete, and stone surfaces such as patios, driveways, and paths.

Yes, it is a biodegradable, water-based formula.

No, Rustins Driveway & Oil Cleaner is a ready-to-use product and does not require mixing.

The coverage is approximately 5 square metres per litre, depending on the porosity of the surface. A 4-litre container can cover up to 20 square metres.

For severely affected areas, it is recommended to use a hard bristle brush to agitate the solution on the stain after the initial application and waiting period, before rinsing thoroughly.

Yes, it is recommended to observe proper safety measures during application, including wearing appropriate protective wear such as gloves and eye protection.

After applying and allowing the cleaner to work briefly (noting any frothing), you should agitate with a brush if necessary, and then rinse the surface thoroughly with water.

Ensure the surface was adequately wetted before application. For stubborn stains, allow the cleaner to work for a slightly longer period and use a stiff brush to agitate the area before rinsing.

Frothing is a normal reaction. Ensure you rinse thoroughly with plenty of water. If frothing is unmanageable, slightly reduce the application concentration if possible (though this product is ready-to-use) or rinse more frequently.

This is likely due to not testing on a small, hidden area first. Discontinue use on the affected area and rinse thoroughly. If damage is evident, consult Rustins for specific advice.

Use a strong jet of water from a hose or pressure washer (on a suitable setting for the surface) to ensure all residue is removed. Multiple rinses may be necessary.