Best current price£15.99from eBay
Shopping.co.uk recommended and popular offers
eBay£15.99Visit shop Matrix Extending Leg Black 25mm 450mm / Coarse Fishing Tackle
Visit shop
Total Fishing Tackle£15.99Visit shop Matrix Black - 25Mm Seatbox Extending Leg 450Mm
Visit shop3 offers from £15.99
View price history by clicking the chart icon.
The Matrix Extending Leg (GMB195-FX) is a versatile accessory designed for anglers using 25mm seatbox systems who need a stable, adjustable foundation on uneven terrain. Its primary benefit is the 330mm of vertical extension and the 360-degree mud foot that provides secure anchoring in soft ground, though it is specifically engineered for 25mm round leg configurations and will not fit larger or square-profile setups.
| Model Part Number | GMB195-FX |
|---|---|
| Brand | Matrix |
This leg is specifically designed for 25mm round leg configurations.
The leg provides an adjustable range from 450mm up to 780mm.
This product is supplied as a single unit.
No, this is designed for round profile legs and is not compatible with square profiles.
The mud foot rotates 360 degrees to settle on uneven ground and provides a larger surface area to prevent sinking in soft mud.
The leg features a durable anodised finish, which is highly resistant to standard wear and tear encountered at the bank.
Ensure the seatbox clamping screw is fully tightened and that the leg is free of mud or lubricant residue.
Rinse the handwheel and inner thread with clean water to remove any accumulated debris or grit.
Clear out any silt packed into the rotating joint and apply a small amount of silicone-based spray if necessary.
To install, remove your existing 25mm seatbox leg and slide the Matrix Extending Leg into the seatbox leg housing. Tighten the existing seatbox clamping mechanism onto the top section of the leg. To extend the leg, loosen the ergonomic handwheel, slide the inner tube to the desired height, and tighten the wheel back down to lock it in place.
Care Instructions: After fishing, rinse the leg with fresh water to remove grit and silt, especially from the mud foot joint. Periodically wipe the inner sliding tube with a clean cloth to ensure smooth movement. Store in a dry place to maintain the integrity of the anodised finish.
