Home Strip Paint & Varnish Remover - White

Yes, its non-toxic and solvent-free, water-based formula produces significantly fewer harsh fumes compared to traditional chemical strippers, making it much safer for indoor applications. However, always ensure good ventilation.

This remover is highly versatile and effective on ceramic, concrete, wood, plaster, and masonry. Always conduct a small test patch first, especially on delicate or painted surfaces.

Dwell time varies depending on the type of paint/varnish, the number of layers, and ambient temperature. It can range from 30 minutes to several hours, or even overnight for very stubborn coatings. A test patch will help determine the optimal time for your specific project.

Although the product is non-toxic and solvent-free, it is always recommended to wear chemical-resistant gloves and eye protection when handling any stripping agent to prevent skin or eye contact.

The primary recommended surfaces are ceramic, concrete, wood, plaster, and masonry. While it may work on some metals, we recommend performing a small test patch in an inconspicuous area first to ensure no adverse reactions or discoloration occur, as metal is not explicitly listed.

Cleanup is straightforward with water. Scrape off the softened paint/varnish, then wipe the surface clean with a damp cloth or sponge. Tools can also be cleaned with water.

Ensure a thick, even layer of remover was applied. Increase the dwell time, allowing the product more time to penetrate. For very old or multi-layered coatings, a second application may be necessary.

Work in smaller sections to manage drying time. Apply a thicker layer of the product. In very warm or windy conditions, you can cover the applied area loosely with plastic sheeting to keep the remover moist and active.

Wipe the surface thoroughly with a damp cloth to remove residual product and softened paint. For stubborn stickiness, a light reapplication for a shorter period, followed by wiping, can help. Light sanding after the surface is completely dry can also remove minor residue.

This is rare with a gentle, water-based product but can occur if the product is left on for excessively long periods on certain delicate surfaces, or if aggressive scraping was used. Always perform a test patch first. For wood, discolouration can often be corrected with light sanding or a wood cleaner/brightener.