Dome Head Rivets - Silver - 5.0 X 25mm

These rivets are constructed from a combination of high-quality aluminum and steel.

The rivets have a diameter of 5.0mm and a length of 25mm.

You will need a standard rivet gun (riveter) that is compatible with 5.0mm diameter rivets.

While they can be used on firm plastics or composites, they are primarily designed for joining metal components. Performance on wood may be limited due to the material's compressibility.

They offer good durability for general use. For highly corrosive environments, specialized rivets might be more appropriate.

Ensure you use the correct hole size, that the material thickness is appropriate for the rivet length, and that the rivet gun is functioning correctly to fully set the rivet.

A dome head provides a larger bearing surface, which helps distribute the load more evenly, and offers a neat, finished appearance on the surface.

Ensure the rivet gun is properly aligned with the rivet mandrel. Check if the rivet gun requires maintenance or if the mandrel is not fully seated.

Verify that the drilled hole size is correct for the rivet diameter. Ensure the combined thickness of the materials is within the rivet's capacity. Check for proper operation of the rivet gun.

This could indicate an issue with the rivet gun's setting or the rivet itself. Consult your rivet gun's manual for adjustments. Ensure you are using the correct size rivets for your tool.

Ensure the rivet is fully inserted and the rivet gun is applying adequate pressure. A slightly countersunk hole might be needed for a perfectly flush finish, though this is not standard for dome heads.