Beta Tools Grease Gun - Lever Operated

This grease gun is compatible with most standard greases available in cartridges or in bulk form. Always ensure the grease type is appropriate for the application (e.g., lithium-based, high-temperature).

To use a cartridge, insert it directly into the barrel after removing the barrel end and follower plate. To use loose grease, pack the barrel with grease after removing the barrel end and follower plate, ensuring minimal air pockets.

The grease gun has a maximum pressure rating of 550 Bar, which is approximately 8,000 PSI.

It is recommended to wipe down the exterior after each use. A more thorough internal cleaning might be needed if switching grease types or if the gun has been stored for an extended period.

The grease gun has a capacity of 500cc.

Yes, it is suitable for home use, especially for vehicles, motorcycles, or machinery that require regular, heavy-duty lubrication. For very light or infrequent tasks, a smaller or lighter-duty model might also suffice.

Ensure the barrel is fully loaded and the follower plate is pushed firmly against the grease. Check that the air bleeder valve (if present) is closed and operate the lever to prime the system. Verify the cartridge is properly seated and the plastic seal has been removed.

Check that the barrel is securely screwed onto the head. Inspect the follower plate seal and the barrel's internal seals for damage or wear. If damaged, they may need replacement.

The grease may be too stiff for the ambient temperature, or the lubrication point may have excessively high back pressure. Try warming the grease or the gun slightly. Ensure the gun is properly primed. Clean any obstructions from the grease fitting.

When loading loose grease or a new cartridge, air can become trapped. Operate the lever slowly and repeatedly to purge the air. Some models have a dedicated air bleeder valve to assist with this process.