Shopping.co.uk

d-c-fix Splashback Wallpaper - Rusty Stone

d-c-fix Splashback Wallpaper - Rusty Stone

A thicker wallpaper with a 3D effect that can be applied over flat tiles in a kitchen or bathroom,...

Best current price£23.31from B&Q

Best offers

Shopping.co.uk recommended and popular offers

All Offers

3 offers from £23.31

View price history by clicking the chart icon.

B&QB&Q - Pastel Tile 67.5Cm X 4M 3D Wallpaper
Free delivery in 1–3 days
£23.31
Visit shop

Product Information

Full details

This d-c-fix Splashback Wallpaper in Rusty Stone is designed for homeowners looking for a quick and easy way to update kitchens and bathrooms without retiling. Its key benefit is providing a realistic 3D tile effect that is durable and waterproof, offering a significant aesthetic upgrade. A caveat is the requirement for a perfectly smooth, dry, and clean surface for optimal adhesion and a seamless finish.

All features

Model Part NumberF2701019
Brandd-c-fix

Extended Product Information

FAQs

Can I apply this wallpaper over textured tiles?

No, this wallpaper is designed for smooth, flat surfaces only. Applying it over raised or textured tiles will result in an uneven finish and poor adhesion.

How do I ensure a waterproof finish?

A waterproof finish is achieved by sealing all edges and butt joins with clear silicone sealant. Allow the sealant to cure fully as per its instructions.

What is the best way to clean the wallpaper?

Clean the wallpaper at room temperature with a damp cloth. Avoid abrasive cleaners or excessive scrubbing, especially on the sealed edges.

Can this wallpaper be used in a shower cubicle?

Yes, it can be used in a shower cubicle if the surface is properly prepared and all edges and seams are meticulously sealed with clear silicone sealant to prevent water ingress.

How do I remove the wallpaper when I want a change?

To remove, carefully pull the PVC surface away from the support paper starting from a corner. The remaining paper layer can either be removed completely or left as an under-surface for new wallpaper.

Does the horizontal application affect durability?

No, the horizontal application is primarily for aesthetic reasons, allowing for a join-free look. The durability comes from the thick PVC material and proper sealing of edges.

What adhesive should I use for existing ceramic tiles?

For non-absorbent surfaces like ceramic tiles, use a dedicated wallpaper glue and apply it directly to the wall surface before applying the paper.

Troubleshooting

Bubbles or creases appear after application

Carefully lift the edge of the affected area and re-smooth the wallpaper. Ensure the surface was perfectly smooth and clean before application. Use a plastic smoother or credit card to push out air bubbles towards the nearest edge.

Wallpaper is not sticking well

Check if the correct adhesive was used for the surface type (absorbent vs. non-absorbent). Ensure the surface was clean, dry, and free from grease. For non-absorbent surfaces, reapply glue to the wall and press the paper firmly.

Water seeping through edges

This indicates the edges and joins were not properly sealed. Carefully remove the affected wallpaper section, clean the area, and reapply with fresh wallpaper, ensuring all edges are thoroughly sealed with clear silicone sealant.

Difficulty cutting around sockets

Use a sharp craft knife or sturdy scissors. Make small, precise cuts rather than large ones. Gently fold the wallpaper back from the edge of the socket to get a clean cut line.

Pros and Cons

Pros

  • Provides a realistic and attractive 3D tile effect.
  • Waterproof and durable, suitable for high-moisture areas.
  • Quicker and easier to install than traditional tiling.
  • Can be applied over existing surfaces, saving time and effort.
  • Easy to cut and shape for custom fits.

Cons

  • Requires a perfectly smooth, solid, dry, and clean application surface.
  • May require specific adhesives depending on the substrate (absorbent vs. non-absorbent).
  • Edges and joins must be sealed with clear silicone sealant.
  • Not suitable for uneven surfaces like raised tiles or wood panelling.
  • Application direction is primarily horizontal.

Setup, Compatibility & Care

Surface Preparation: Ensure the application surface is smooth, solid, dry, and thoroughly clean before beginning. Remove any dust, grease, or loose material.

Adhesive:

  • For absorbent surfaces (e.g., plastered walls), apply standard wallpaper paste to the reverse of the paper and let it soak for 10 minutes.
  • For non-absorbent surfaces (e.g., ceramic tiles), use a dedicated wallpaper glue and apply it to the wall surface before placing the paper.

Application:

  1. Cut the wallpaper to the required size using scissors.
  2. Apply the wallpaper, ensuring strips are butt-joined (edges meet without overlapping).
  3. If applying over existing tiles or similar surfaces, ensure they are flat.
  4. Seal all edges and joins with clear silicone sealant for a waterproof finish.

Compatibility: Suitable for application on smooth, flat ceramic tiles, painted walls, hardboard, plywood, and shower walls. Avoid uneven surfaces like raised tiles, wood panelling, and untreated damp walls.

Care: Allow the wallpaper to dry for 24 hours after application before cleaning. Clean at room temperature using a damp cloth. The surface is waterproof once sealed.

Price History

DatePrice
Visit shop